Hi All,
I am using the Open fcoe Initiator (2.6.29.1), Open Solaris Target (build 119)
and cisco nexus FCF. Both the initiator and target connected to FCF through
Ethernet switch.
I have installed the open fcoe initiator user space tools and dcdb also. And I
enabled the pause mechanism in the initiator machine.
I am creating the LUNS on the solaris target. And I am also able to
see those LUNS on the initiator when I do lsscsi,
I made the ext2 file system on the discovered LUN, when I tried to
mount the discover LUN it's giving below error:
mount: wrong fs type, bad option, bad superblock on /dev/sdb,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
How do I do the actual data transfer to the target and how to
verify that?
Output of lsscsi from initiator Machine:
[0:0:0:0] disk ATA ST340015A 3.01
/dev/sda
[3:0:0:1] disk SUN COMSTAR 1.0 /dev/sdb
Dmesg Out put from the Open-fcoe Initiator:
scsi2 : FCoE Driver
libfc: Link up on port ( 0)
libfcoe: host2: FIP selected Fibre-Channel Forwarder MAC 00:02:a5:4e:96:65
libfc: Assigned FID ( 10201) in FLOGI response
scsi3 : FCoE Driver
libfc: Link up on port ( 0)
libfcoe: host3: FIP selected Fibre-Channel Forwarder MAC 00:02:a5:4e:96:65
libfc: Assigned FID ( 10201) in FLOGI response
scsi 3:0:0:1: Direct-Access SUN COMSTAR 1.0 PQ: 0 ANSI: 5
sd 3:0:0:1: Attached scsi generic sg1 type 0
sd 3:0:0:1: [sdb] READ CAPACITY(16) failed
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
sd 3:0:0:1: [sdb] Sense not available.
sd 3:0:0:1: [sdb] 7139200 512-byte logical blocks: (3.65 GB/3.40 GiB)
sd 3:0:0:1: [sdb] Write Protect is off
sd 3:0:0:1: [sdb] Mode Sense: 53 00 00 00
sd 3:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 3:0:0:1: [sdb] READ CAPACITY(16) failed
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
sd 3:0:0:1: [sdb] Sense not available.
sdb:
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
unable to read partition table
sd 3:0:0:1: [sdb] READ CAPACITY(16) failed
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
sd 3:0:0:1: [sdb] Sense not available.
sd 3:0:0:1: [sdb] Attached SCSI disk
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 7139072
Buffer I/O error on device sdb, logical block 892384
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 7139192
Buffer I/O error on device sdb, logical block 892399
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 7139192
Buffer I/O error on device sdb, logical block 892399
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 384
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 88
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 384
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
Buffer I/O error on device sdb, logical block 4
Buffer I/O error on device sdb, logical block 5
Buffer I/O error on device sdb, logical block 6
Buffer I/O error on device sdb, logical block 7
Buffer I/O error on device sdb, logical block 8
sd 3:0:0:1: [sdb] Unhandled error code
sd 3:0:0:1: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Thanks
Lokanadham
DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended
for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates.
Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the
opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of
this message without the prior written consent of the author of this e-mail is
strictly prohibited. If you have
received this email in error please delete it and notify the sender
immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
