Thanks for the response. Actually qle 2460 fails to initialize in qlt mode as
well in OpenSolaris b129. It works in SXCE b129 after I luupgrade from B128.
Here is the trace
0xffffff02d88c6000: qlt0,0:0245947: iport is ffffff02d7e04178
:0255836: fct_port_shutdown: port-ffffff02d7e04078, qlt_mailbox_command: qlt-fff
fff02d7d45300, cmd-0x60 timed out
:0259508: fct_port_shutdown: port-ffffff02d7e04078, qlt_mailbox_command: qlt-fff
fff02d7d45300, cmd-0x60 timed out
r...@tiger:~# fcinfo hba-port
HBA Port WWN: 2100001b3207d916
Port Mode: Target
Port ID: 0
OS Device Name: Not Applicable
Manufacturer: QLogic Corp.
Model: QLE2460
Firmware Version: 5.2.1
FCode/BIOS Version: N/A
Serial Number: not available
Driver Name: COMSTAR QLT
Driver Version: 20091117-1.03
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: not established
Node WWN: 2000001b3207d916
--
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
