I have PM working on my ICH10-based PC, using a SanDigital TR4-M 4 drive bay eSATA enclosure. I *think* this enclosure uses the SiI3726 PM but I could be wrong - I forgotten.
I am currently running SNV128. It mostly works, but occasionally I get temporary lockups - where the lights on the box stop blinking (some stay solid depending on which drive was being accessed at the time) and the PC itself appears to freeze for a long period - sometimes as long as 30 seconds. Then it recovers and keeps going, with no apparent data corruption. I have to be careful though - if I do a scrub on those drives there is a chance the PC locks up or resets itself if I try doing disk accesses to them at the same time. When it doesn't lock up (which is 95% of the time) the data transfer rates plummet to below 20 MB/sec. So for a few months I was using a 4 drive USB enclosure - but that enclosure just died last night and now I had to put the drives in the TR4-M enclosure. I had a couple of lockups when doing ZFS import but this seems to have fixed itself after a couple of reboots. -- This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list storage-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/storage-discuss