a...@everycity.co.uk said: > . . . > # cfgadm -l | grep c7t0d0 > sata1/0::dsk/c7t0d0 disk connected configured ok > > However when I attempt to unconfigure the sata port in preperation for > replacing the drive, it doesn't work:
> # cfgadm -c unconfigure sata1/0 > Unconfigure the device at: /devices/p...@0,0/pci1022,7...@1/pci11ab,1...@1:0 > This operation will suspend activity on the SATA device Continue (yes/no)? yes > cfgadm: Hardware specific failure: Failed to unconfig device at ap_id: > /devices/p...@0,0/pci1022,7...@1/pci11ab,1...@1:0 > . . . Try "cfgadm -c disconnect sata1/0". You'll may to do a "connect" after physically replacing the drive, and before "configure". Also check in "man cfgadm_sata", there are some "-x" hardware-specific options which might be useful. Regards, Marion _______________________________________________ storage-discuss mailing list storage-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/storage-discuss
