Hello
After a motherboard failure I've replaced it with a similar but newer model and
now I can't read the hard disks properly. (Incidentally an ubuntu live CD can
read the sectors ok so I assume the disks themselves are fine)
Using the format command I can see the disks, but they are <drive type unknown>
Many messages show:
gda: [ID 107833 kern.warning] WARNING: /p...@0,0/pci-...@9/i...@1/c...@0,0
(Disk0):
Error for command 'read sector' Error Level: Informational
gda: [ID 107833 kern.notice] Sense Key: aborted command
gda: [ID 107833 kern.notice] Vendor 'Gen-ATA' error code: 0x3
Is there something about the SATA driver which is not able to read the disks?
scanpci shows things like this:
pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x10de device 0x0ad0
nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode)
--
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
