Hello
> The second problem is with eth0: I configured the network with SAS, but the
> response is "network unreacheable" and no eth0 interface. I had more success
> with ifconfig, but after reboot I have to do it again. How can I keep the
> settings? Is it just on my machine or SAS still needs some fixing?
Don't use SAS to configure a PCMCIA ethernet card. If you look at
'dmesg' you'll find that Stomix tries to bring up eth0 before the PCMCIA
modules are loaded.
Remove your eth0 configuration from SAS which sticks it in
/etc/network/network.opts. This is correct, but not for PCMCIA.
There is a configuration script that helps you setup
/etc/pcmcia/network.opts.
Sorry, but I can't remember what it is called. Do a 'man -k pcmcia' and
have a look down the list. It's pretty obvious when you see it.
Hope that helps.
Matt
--
--------Chaos, panic and disorder - my work here is done--------
http://www.spinner.org.nz stick at spinner dot org dot nz
stick at rage dot net dot nz
----------------------------------------------------------------
_______________________________________________
Stormlinux-users-list mailing list
[EMAIL PROTECTED]
http://www.stormix.com/community/lists/listinfo/stormlinux-users-list
