Dear stovers,
We are currently running a pilot for locally made stoves going down the high
specification but locally adapted central manufacturing route. The stoves are
made from mild steel and have the general dimension of a 20 liter paintcan.
As part of the pilot project we will be bringing 500 stoves to the market. For
a number of reasons we want and need traceability of the stoves to the end user
but also need "protection" from low specification copy-cats that will soon
spring up.
We are looking at various ways how to put a label or someting similar on the
stove. Technology for this is hardly available here in The Gambia. We can print
sticky labels but with heat exposure and washing they will soon come off.
Stamping in to the body is cumbersome and adds to much cost.
Anybody out there who faced a similar challenge and found a cost effective
elegant solution? All suggestions would be welcome.
Cheers
George from the jungle
_______________________________________________
Stoves mailing list
to Send a Message to the list, use the email address
[email protected]
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
for more Biomass Cooking Stoves, News and Information see our web site:
http://www.bioenergylists.org/
