Stovers,
I was running an experiment using shinny stove pipe as a 'stove' and using the IR detector was measuring the temperature on the outside of the pipe. It read about 30c. But was much higher as noted when I tried to hold the pipe. Is this inaccuracy due to the reflective surface? I am thinking of painting the surface black to get an accurate reading if it is. I would guess the pipe to be ~200 to 300c - not the 30 that was indicated. Thanks Frank Frank Shields Control Laboratories, Inc. 42 Hangar Way Watsonville, CA 95076 (831) 724-5422 tel (831) 724-3188 fax <http://www.biocharlab> www.biocharlab.com
_______________________________________________ Stoves mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org for more Biomass Cooking Stoves, News and Information see our web site: http://www.bioenergylists.org/
