Hi Lanny, The stove safety documents on the PCIA website include a description of stove-related hazards, guidelines for safer stove design, and test protocols with metrics to rate stove safety. The protocols were designed for testing in the field with minimal equipment. This acknowledges the financial and technical constraints of small-scale manufacturers in developing countries. That said, most of my safety testing is done in a laboratory, as I expect is common with others on the discussion list. Please let me know if you have any questions.
Durability testing is not covered in my earlier work. I suggest you contact Christian L'Orange at Colorado State University regarding durability testing (e.g., 10. Structural integrity, an example from your initial inquiry). Thanks Christa for the reference! With best regards, Nate -- Nathan Johnson, Ph.D. Postdoctoral Fellow [email protected] HOMER Energy: Clean Power Everywhere 2334 Broadway, Suite B Boulder, CO 80304 Tel: +1-720-565-4046 www.homerenergy.com On Mar 13, 2013, at 12:00 PM, [email protected] wrote: > ------------------------------ > > Message: 2 > Date: Tue, 12 Mar 2013 14:45:51 -0400 > From: "Lanny Henson" <[email protected]> > To: "Discussion of biomass cooking stoves" > <[email protected]> > Subject: [Stoves] Hazards for Institutional Biomass Cooking Stoves > Message-ID: <553D7F06C706437DBD0B4494B1464284@main> > Content-Type: text/plain; charset="iso-8859-1" > > I need liability insurance for an institutional size wood cooking stove that > I would like to market in the USA as well as outside the USA. > > I need a list of stove hazards, problems and solutions for a presentation to > an insurance underwriter. > > Is anyone else working on this? I have started a list and I would appreciate > your input and comments. > > Lanny Henson > > Hazards for Institutional Biomass Cooking Stoves > > 1.. Hot surfaces that can cause burns > 2.. Cook space air pollution > 3.. Tip over > 4.. Bump spill not steady footing > 5.. Hot handles > 6.. Over fire run away fire, out of control fire (batch burners) > 7.. Hot coals spill out, roll out or puff out igniting combustibles. > 8.. Flame containment, not enough distance to combustibles. > 9.. Hot stove surfaces, not enough distance to combustibles. > 10.. Structural integrity, falls apart, burns up, door fails, legs breaks off > 11.. Sharp edges that can cut or scrape > 12.. Sparks out the exhaust that could ignite combustibles > 13.. Volume of fuel in a batch could be a factor. example 12 kg of wood in a > wood space heater verses 1 kg of wood in a cook stove. 12 kg has the > potential to do more harm than 1 kg. > 14.. Pot spill from difficult access. Like lifting a pot from a sunken pot > stove. > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20130312/24368a76/attachment-0001.html> > > ------------------------------ > > Message: 3 > Date: Tue, 12 Mar 2013 21:01:15 +0200 > From: CHRISTA ROTH <[email protected]> > To: Discussion of biomass cooking stoves > <[email protected]> > Subject: Re: [Stoves] Hazards for Institutional Biomass Cooking Stoves > Message-ID: <[email protected]> > Content-Type: text/plain; charset="iso-8859-1" > > Lanny, have you had a look at the safety protocol suggested by Nathan > Johnson? It is available on the legacy website of PCIA on the bottom of the > page http://www.pciaonline.org/testing. It actually operationalizes most of > the issues you are raising. > regards Christa > Am 12.03.2013 um 20:45 schrieb Lanny Henson <[email protected]>: > >> I need liability insurance for an institutional size wood cooking stove that >> I would like to market in the USA as well as outside the USA. >> >> I need a list of stove hazards, problems and solutions for a presentation to >> an insurance underwriter. >> >> Is anyone else working on this? I have started a list and I would appreciate >> your input and comments. >> >> Lanny Henson >> >> Hazards for Institutional Biomass Cooking Stoves >> >> Hot surfaces that can cause burns >> Cook space air pollution >> Tip over >> Bump spill not steady footing >> Hot handles >> Over fire run away fire, out of control fire (batch burners) >> Hot coals spill out, roll out or puff out igniting combustibles. >> Flame containment, not enough distance to combustibles. >> Hot stove surfaces, not enough distance to combustibles. >> Structural integrity, falls apart, burns up, door fails, legs breaks off >> Sharp edges that can cut or scrape >> Sparks out the exhaust that could ignite combustibles >> Volume of fuel in a batch could be a factor. example 12 kg of wood in a wood >> space heater verses 1 kg of wood in a cook stove. 12 kg has the potential to >> do more harm than 1 kg. >> Pot spill from difficult access. Like lifting a pot from a sunken pot stove. >> _______________________________________________ >> Stoves mailing list >> >> to Send a Message to the list, use the email address >> [email protected] >> >> to UNSUBSCRIBE or Change your List Settings use the web page >> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org >> >> for more Biomass Cooking Stoves, News and Information see our web site: >> http://www.bioenergylists.org/ >> > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20130312/4204bd1d/attachment-0001.html>
_______________________________________________ Stoves mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org for more Biomass Cooking Stoves, News and Information see our web site: http://www.bioenergylists.org/
