Dear Frank
Burning very dry wood is difficult and it makes a lot of smoke. That is why stoves should not be evaluated with very dry wood when they are designed to burn 'ordinary wood'. If you get the conditions right for the early fire they are double-guaranteed o be wrong for the late fire. Much better a continuous input of damp material. Regards Crispin ++++++ Dear Crispin, Tom and all, I would think a batch mode would be better. A continuous mode means you have water vapor all the time. In batch mode one would heat and find the gas temperature goes to 100c. Then when the water is finally burned off the temperature rises and you can then push the fuel forward to do what you want to do with the now dry wood. Not sure this happens and have not seen a graph of this but think this is what would happen. Frank
_______________________________________________ Stoves mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org for more Biomass Cooking Stoves, News and Information see our web site: http://stoves.bioenergylists.org/
