[Default] On Fri, 14 Jun 2013 17:37:30 -0400,"Crispin Pemberton-Pigott" <[email protected]> wrote:
>We are experimenting in Indonesia with draft-operated buoyancy balancers to >limit the pull to the ideal even when combustion conditions change in the >large wood stoves. They are easy and cheap to make. They are mounted on the >side of the stack of all oil furnaces. We have used them on pellet stoves (which have their own id fans) to limit draught on an insulated ss chimney that rose through 4 floors. I wasn't entirely happy with the idea as it raised the possibility of the boiler room getting combustion products if the seal wasn't good, I would have been happier if the air was sucked from outside. In fact there was subsequently a problem but this was down to poor maintenance. AJH _______________________________________________ Stoves mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org for more Biomass Cooking Stoves, News and Information see our web site: http://stoves.bioenergylists.org/
