Richard, This is great info. If you send me a couple different briquettes, when I get some time, I would like to do some simple tests on them to see if they can be used to aid in formulating for making the perfect briquette. We then just need to compare the test results with the 'how well they worked' results. Perhaps we can find a simple way to put some science in all this. : )
Regards Frank Frank Shields Control Laboratories; Inc. 42 Hangar Way Watsonville, CA 95076 (831) 724-5422 tel (831) 724-3188 fax [email protected] www.controllabs.com -----Original Message----- From: Stoves [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, September 04, 2013 2:32 PM To: [email protected] Subject: [Stoves] Preparing for the winter's fuel supply in Oregon Here's a post from Richard Stanley with some pictures I have had to shrink to get below the acceptable size limit. It can be a bit time consuming so some posts that are difficult to be reduced may get rejected. Consider that many smartphones produce good quality jpegs which need 2 or more megabytes of bandwidth. I find Irfanview offers a good batch processing mode that can get them down to a standard size or, as in this case I reduced the dimensions to 30% of original. Also remember including all the text of the previous messages in the thread also contributes to the size limit. AJH >Dear fello briquetters with ready access to, of all things, a used garbage disposal and household sink. > >> >> Planning for the winter supply of hollow core ag and household >> residue based briquettes, means a lot of material processing. Thats >> the not so much fun part of the process. I have long thought about >> the possibility of using a garbage disposal for pulping materials so I got ahold of a scrapped double basin sink and bolted a scrap disposal on a few days ago, just to see if it was worth pursuing. >> Turns out a that its pretty efficient but you really have to clean >> out any rocks. I got rid of those, by filling the non disposal side >> of the sink The larger basin, half full of water and soaking and >> sloshing the leaves /grasses ferns and wigs around a bit, to settle >> out the rocks, stones, metal stuff. Next, I skimmed off the floating material into the second smaller basin-- the one onto which I had attached the disposal. >> I then plowed screed the material over the entrance hole with right >> hand then stuff it in with a running garden hose spray nozzle in my >> left hand left hand . It does a good job of chopping and pulping the fibrous mass into a really well mixed slurry-without destroying the fibers entirely- good enough in fact, that that with just a day of soaking to soften everything a bit, I can compact it directly in the press, no paper or other binder,--and more critically, no decomposition needed. >> (it's amazing too, just how much gritty sediment accrues, in the >> larger soaking basin as well). Clearly wet processing of the feedstock seems to be a good way to go..Will have to test it out over the coming month before I am assured of its real viability but it' be far better if several of us do the same thing -and share back the findings to speed up and deepen the learning curve for the rest of us, eh ! >> >Richard Stanley >Legacyfound.org > _______________________________________________ Stoves mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org for more Biomass Cooking Stoves, News and Information see our web site: http://stoves.bioenergylists.org/
