Thanks for the update David.
Also thank you for sharing progress, whatever you can - either descriptions or drawings. It is good that you have the preheating worked out. While working on paraffin stoves I found that having too much preheat caused a lot of free carbon (radicals) which accumulated like snowflakes on available sharp edges. This leads to chunks of black carbon breaking off and blocking the nozzle. That is why paraffin pressure stove come with a little wire for clearing the nozzle: overheating the fuel. Regards Crispin Hello People, I am delighted to notify you that my bio-diesel stove is complete and in a good working condition. It has taken me so much time to complete it because of lack of materials, but finally I was able to modify the pressure lamp and design it work with the bio-diesel fuel. My design was concentrated on improving the preheat of the bio-diesel plus the fuel nozzle of the stove. I will be posting the pictures of the stove later. Am calling it "The Effective Bio-diesel Stove(EBS)"
_______________________________________________ Stoves mailing list to Send a Message to the list, use the email address [email protected] to UNSUBSCRIBE or Change your List Settings use the web page http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org for more Biomass Cooking Stoves, News and Information see our web site: http://stoves.bioenergylists.org/
