On Wed, Dec 21, 2011 at 18:07, David Cohen <stum...@dave-cohen.com> wrote:
>
> And a more complicated question for my setup... When I switch groups, both
> monitors switch. Is there any way to associate a group with a head, instead
> of a screen?
>
I've been looking for this and so far have not been able to
find anything that works in that manner. What I would like
is for every physical monitor to be associated with a group/virtual desktop
automagically if it detects an external monitor being attached and available.
I've tried this with Xfce4, LXDE, scrotwm, openbox and vtwm.
None of them automagically did anything. I had to manually enable
the external screen using xrandr / arandr and get the behaviour I wanted.
arandr is awesome to setup multiheads. I used it to generate scripts
that use xrandr and now use the scripts from the command line.
Would be nice if stumpwm would just detect that there is a second monitor
or third or 4th monitor available and just start using them. Or stop using them
as they get turned off.
Here are the command lines I use:
#### LVDS1 = laptop screen
#### VGA1 = analog connection to external monitor
#### DP1 = digital connection to external monitor.
## two screens. laptop in front of me, external to the right of me.
--primary is used
## so that stumpwm does not move the mode-line to the external monitor. stumpwm
## I believe presumes that the new external connection is the primary one.
## Both screens are set to their individial highest available resolution
xrandr --output LVDS1 --primary --mode 1680x1050 --pos 0x0 --rotate
normal --output DP1 --off --output VGA1 --mode 1920x1200 --pos 1680x0
--rotate normal
## same as above, but using the same resolution for both screens
xrandr --output LVDS1 --primary --mode 1680x1050 --pos 1680x0 --rotate
normal --output DP1 --off --output VGA1 --mode 1680x1050 --pos 0x0
--rotate normal
## both monitors show the same output, aka mirroring
## I switch to this before I turn off the external monitor because
## otherwise with stumpwm you end up loosing the frame that was
## on the external monitor, unless you do a restart-soft.
xrandr --output LVDS1 --mode 1680x1050 --pos 0x0 --rotate normal
--output DP1 --off --output VGA1 --mode 1680x1050 --pos 0x0 --rotate
normal
cheers,
mehul
--
Mehul N. Sanghvi
email: mehul.sang...@gmail.com
_______________________________________________
Stumpwm-devel mailing list
Stumpwm-devel@nongnu.org
https://lists.nongnu.org/mailman/listinfo/stumpwm-devel
