I've got a laptop with an external monitor, managed I think by xrandr (?), anyway not Xinerama. The external monitor basically works fine: I switch between one and two using two xrandr commands:
one.sh: #!/bin/sh xrandr --output LVDS1 --mode 1280x800 --pos 0x0 --rotate normal --output DP1 --off --output VGA1 --off and two.sh: #!/bin/sh xrandr --output LVDS1 --mode 1280x800 --pos 1440x100 --rotate normal --output DP1 --off --output VGA1 --mode 1440x900 --pos 0x0 --rotate normal These are commands saved using arandr. The laptop boots with the external monitor mirrored, and I create the second display with the second command. The second display is another frame, but not another screen (ie *screen-list* returns a list of one). All this works fine. The problem occurs when I use the first command above to deactivate the external monitor. The frames collapse into one, and I get a weird thing where there are two frames on top of one another. Things initially look normal, but if I split the frame on my laptop screen, I can see half of the other (fullscreen) frame still peeping around the side. By switching and resizing the frames and windows and generally banging on it, I can eventually get it to rearrange the frames properly. It's not a disaster, but is annoying. I'm calling the above shell commands via stumpwm user commands, so if there's anything I can run before or after to clean things up, that would be very easy. Is there anything I should be doing differently? Thanks, Eric _______________________________________________ Stumpwm-devel mailing list Stumpwm-devel@nongnu.org https://lists.nongnu.org/mailman/listinfo/stumpwm-devel
