Ok, thank you very much.
I am pushing our mails to the forum, just in case it may help someone.
Yours sincerely
Pierre
Le 01/09/2014 00:53, [email protected] a écrit :
Sorry for my lack of clarity.
Your patched 5.02 works as a service. The official 5.03 does not work
as a service.
On 31.Aug.14 15:13, Pierre DELAAGE wrote:
Hello,
Thanks for the feedback.
So...are you saying that it is now working with MY patched 502 and
NOT with the official 503 (except for the "not configured msg") ?
Or, finally, are you saying that they work the same, my patched 502
and the official 503 ?
Yours sincerely
Pierre
Le 31/08/2014 22:46, [email protected] a écrit :
Hello Pierre,
Today I downloaded the file you sent. I installed 5.03 on the server
(replacing 4.35), copied your 5.02 executable over the 5.03 exe.
I then copied the 4.35 conf file into the 5.03 directory and finally
I installed and started the service. The service installed and ran,
but there was a message on the notification window saying it was not
configured.
HOWEVER, I believe that message was wrong because the service works
just fine. I was able to send email from the Event log, through the
Windows virtual SMTP server and finally on through a gmail account!
I did have to uncheck the service option "allow to interact with
desktop" because Server 2008 R2 will not allow a service to interact
with the desktop.
Thank you very much, I am sorry it took a couple of days to do this
and report back to you!
On 29.Aug.14 07:38, Pierre DELAAGE wrote:
Hello,
have you tried the patched 502 version I sent you last week ?
Regards
Pierre
Le 28 août 2014 à 21:20, "[email protected]" <[email protected]> a
écrit :
Hopefully you were smarter than I and didn't piss away several
hours trying to solve the issue before turning to this forum? I
felt kind of foolish for wasting so much time trying to fix it on
my own.
On 28.Aug.14 10:50, WNSDEV wrote:
Hi,
I ran into the same problem with Stunnel 5.03 on Windows 7 and
downgrading
to V 4.35 fixed it. Is there a new version to address this issue
going to
be available at some point?
Thanks,
Pete
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Thursday, August 21, 2014 4:43 PM
To: [email protected]
Subject: [stunnel-users] Stunnel Windows Server 2008 R2
I have installed stunnel 5.03 on Windows Server 2008 R2 X64.
When I run it
as an application it works perfectly. When I install and run the
service,
it starts but the start notice window, title bar, says Stunnel
5.03 win32 (not configured). It appears that the stunnel service
is not
reading the stunnel.conf.
If anyone has any suggestions how I can successfully run stunnel
as a
service, I would be very appreciative.
Thank you!
_______________________________________________
stunnel-users mailing list
[email protected]
https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users
_______________________________________________
stunnel-users mailing list
[email protected]
https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users
_______________________________________________
stunnel-users mailing list
[email protected]
https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users
_______________________________________________
stunnel-users mailing list
[email protected]
https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users
