Daniele, On 5/11/20 10:53, Daniele Basaldella wrote: > Dear group, > I've to configure a couple of tunneled connections (call them TC1 and > TC2), client side, on a linux system. > The target of both such connections is the same (destination ip and port > are the same, call it DST). > At source side (my server) I have a two IP addresses (call them IP1 and > IP2) assigned and currently working to its unique NIC. I normally use > iptables SNAT to split the traffic between IP1 and IP2 depending on > destination addresses but in this case I've to distinguish it at > application level (TC1 and TC2). > I'd like to get TC1 to set the outgoing traffic with source address IP1 > and TC2 to set outgoing traffic with source address IP2. > > Tunnel Tunnel > Client Server > > TC1: IP1 --\ > >--> DST > TC2: IP2 --/ > > I'm thinking to set one entry in stunnel.conf for each TC1 and TC2 and > use *transparent* = source clause to set the source address but it > seems my case is not so common and I didn't find documentation. > Please could you suggest a solution.
If it's important for you to set the outgoing interface, then you should use: local=IP1 in your config for the tunnel definition. -chris
signature.asc
Description: OpenPGP digital signature
_______________________________________________ stunnel-users mailing list [email protected] https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users
