Picture shows dive to 20m in 30 min. so text should state the same Signed-off-by: Sergey Starosek <[email protected]> --- Documentation/user-manual.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 015cacd..bb5cd85 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -395,14 +395,14 @@ that the cursor represents are indicated at the top of the black information box *Preference* settings. The dive profile itself comprises several line segments demarcated by waypoints (white dots on the profile, as shown above). The default dive depth is 15 m. -If the dive depth was 21 m then the user needs to drag the appropriate waypoints -downwards to represent 21 m. To add a waypoint, double-click on +If the dive depth was 20 m then the user needs to drag the appropriate waypoints +downwards to represent 20 m. To add a waypoint, double-click on any line segment. To move an additional waypoint, drag it. To remove this waypoint, right-click on it and choose "Remove this point" from the context menu. The user needs to drag the waypoints to represent an accurate time duration for the dive. Below is a dive profile that represents a dive -to 21 m for 31 min, followed by a 5 minute safety stop at 5 m. +to 20 m for 30 min, followed by a 5 minute safety stop at 5 m. image::images/DiveProfile2.jpg["FIGURE: Edited dive profile",align="center"] -- 1.8.5.5 _______________________________________________ subsurface mailing list [email protected] http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface
