On Fri, Nov 21, 2014 at 2:35 PM, Joakim Bygdell <[email protected]> wrote:
> > > On 21 Nov 2014, at 16:38, John Van Ostrand <[email protected]> wrote: > > > > To address the position of the temperature graph on the dive profile > window how about allowing the user to move the graph out of the way? > A totally different approach that the patch I sen on Nov 2 that simply > moved the temp graph to the space between the depth graph and whatever is > displayed below, a patch that it seems Dirk missed.. > > > > One thing with the graph window is that it is not fully dynamic as several > parts are hardcoded with respect to the vertical positioning. > For example the position of the temp graph starts in the same vertical > position more or less on every dive regardles if the first temp value is 5° > or 25°, precisely as it should be. > > It is how we position the lower end of the graph that is the problem. > > The lowest point of the depth graph are not in the same vertical position, > for example a dive with max depth of 25m will have the 20m marking on the > same place as a dive with a max depth of 18m. > The result is that the deepest point displayed on the two dives will vary > quite a bit. > This can be fixed quite easily ( but I don't think it's a good thing, because of the overlapping of axis, can make the graph difficult to read ) > > > /Jocke > > _______________________________________________ > subsurface mailing list > [email protected] > http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface >
_______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
