Ticket added http://trac.subsurface-divelog.org/ticket/796
On Tue, Dec 23, 2014 at 1:10 PM, Davide DB <[email protected]> wrote: > I repeated the sequence and I was able to reproduce the bug. > > I exported the dive before/after the new DC import in subsurface format. > Comparing the two xml files I see that after importing the new DC > profile it added a wrong air gas and it modified just one sample with > a phantom "sensor '3'" attribute. > > This is the inserted cylinder: > > <cylinder description='Air' start='218.25 bar' end='83.75 bar' /> > > This is the modified sample: > > <sample time='0:12 min' depth='4.98 m' temp='18.4 C' pressure='218.25 > bar' sensor='3' /> > > BTW the new computer added also this: > > <notes>" "</notes> > > Before adding the new dc profile, the start/end pressure were > calculated (and correctly displayed) by galileo stored pressure > samples. > > I will file a bug later. > > Bye > > > > > > On Tue, Dec 23, 2014 at 12:28 PM, Davide DB <[email protected]> wrote: >> Hummm, >> >> I think I got a nasty bug using two computers. I ask here before I file a >> bug. >> >> I have a dive logged with a Galileo sol and a xdeep black Bottom timers. >> >> 1) I downloaded Galileo data >> 2) I filled all the relevant info as gas used, tanks, pressures, gas >> switches.... >> 3) everything is fine. >> 4) I import xdeep data >> 5) I lost gas switches and gas used hence sac... One gas switch on >> Galielo went to the xdeep. >> >> What should I see in this complicated situation? >> >> I was expecting to find one of the following: >> >> #1 the same gas switches and gas I add on a profile are copied on the other >> #2 The second profile is virgin so I have to insert again gas switches >> >> Actually option #2 would bring me in a dead end: different SAC so only >> option #1 is correct >> >> >> -- >> Davide >> https://vimeo.com/bocio/videos > > > > -- > Davide > https://vimeo.com/bocio/videos -- Davide https://vimeo.com/bocio/videos _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
