I am testing the planner on the latest git (v4.4.2-740-gb144518a85f1). The profile appears to be calculated correctly, but the table output is giving a misleading gas switching depth when the 'display transitions in deco' option is not selected.
Using EAN80, the switch should be at the 9 m stop, but unless 'display transitions in deco' has been selected, the table output (in dive notes once saved) puts it at 6 m. The profile plot has the gas switch icon at the start of the 9 m stop. Subsurface dive plan based on GFlow = 45 and GFhigh = 85 depth runtime duration gas 44m 1min 1min air 44m 25min 24min 15m 30min 5min 12m 35min 4min 9m 38min 3min 6m 50min 11min EAN80 0m 52min 2min (apologies for the poor table formatting - I'm trying to avoid html but gmail isn't letting me paste a real tab character) When the 'display transitions in deco' option is selected, the gas change is at 9 m, where it should be. depth runtime duration gas 44m 1min 1min air 44m 25min 24min 15m 28min 3min 15m 30min 2min 12m 31min 0min 12m 35min 4min 9m 35min 0min EAN80 9m 38min 3min 6m 39min 0min 6m 50min 11min 0m 52min 2min This didn't appear to be an issue when using 50% and 100% for deco. The gas switches are displayed at the correct (21 m and 6 m) stops. I also note that the table isn't displayed at all while in dive plan mode. I assume either that will be fixed for the next release (please do), or the dive plan details box will be removed.
_______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
