yep, qt 5.5 did not help, firmware seems to be 10.18. Any ideas? Current error message on console:
qt.bluetooth.bluez: Bluez 4 detected. qt.bluetooth.bluez: void QBluetoothDeviceDiscoveryAgentPrivate::_q_propertyChanged(const QString&, const QDBusVariant&) "Discovering" QVariant(bool, true) qt.bluetooth.bluez: Discovered: "00:12:6F:2A:0E:E0" "OSTCs 0321" Num UUIDs 1 total device 0 cached false RSSI -70 qt.bluetooth.bluez: Emit: "00:12:6F:2A:0E:E0" qt.bluetooth.bluez: void QBluetoothDeviceDiscoveryAgentPrivate::_q_propertyChanged(const QString&, const QDBusVariant&) "Discovering" QVariant(bool, false) The connection on RFCOMM channel number 1 took more than expected. Wait another 15 seconds. [6.495968] ERROR: Unsupported command. [in hw_ostc3.c:207 (hw_ostc3_transfer)] [12.553353] ERROR: Failed to receive the answer. [in hw_ostc3.c:242 (hw_ostc3_transfer)] [12.553442] ERROR: Failed to read the header. [in hw_ostc3.c:635 (hw_ostc3_device_foreach)] [15.599046] ERROR: Failed to receive the echo. [in hw_ostc3.c:200 (hw_ostc3_transfer)] [15.599138] ERROR: Failed to send the command. [in hw_ostc3.c:487 (hw_ostc3_device_close)] miika On Wed, Sep 30, 2015 at 3:19 AM, Claudiu Olteanu <[email protected]> wrote: > It should work with qt 5.4.1 too. From your logs it seems that the > devices exchanged some data but there was something wrong with the > communication protocol. > If there is something wrong with your qt version I believe that it > would fail on the connection step. > > Claudiu _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
