On 6 February 2017 at 08:29, Stefan Fuchs <[email protected]> wrote: > Hello Robert, hi All, > > I again see one strange effect in deco calculation of repetitive dives. I > thought it may be linked to the surface time issue Robert fixed a few days > ago but this is still there after the patch. > > Please check the attached file and try to do the following: > > - For dive 1002 do Log -> Edit dive in planner > - Delete all planner points after 2nd with Ctrl-leftclick > - With my settings (screenshot below) you will have a runtime of 51min, > surface time is correct: 47:30h > - Now change the date/time when the dive is planned to 1h later > (3.01.2017, 14:00h) > - No the dive is not considered to be a repetitive dive any more because > surface time is >48h -> ok > - But now runtime is 58min, deco is much longer ??! > - BTW: This does not happen with some other scenarios I tested with deco > dives with air/TX,... Maybe it has s.th. to do with dive 1001 setup which > is a little bit more special using the Tx50/15 for ascent until 15m and > having the real bottom gas specified as second gas?! > > > > Would be great if you could look into this as well! Thanks! > > > I'm away from my own computer and won't have time to look into this properly, at least until next week, but I can confirm the problem (with Windows daily, 4.6.0-53-ga959e437a99e). I noticed that the total runtime remains constant at 51min for any surface interval <48hr. Even with dive time set to 1 Jan, 13:40, which is surface interval of 10min, the runtime is 51min.
Dive 1001 doesn't look particularly unusual to me. > One other note: Would it be possible to also add a collision detection > when planning a dive at the very same time of another existing dive in the > planner? This today gives no warning but planner results are incorrect. > > > Best regards > Stefan > > -- > > Stefan Fuchs > E-Mail: [email protected] > > _______________________________________________ > subsurface mailing list > [email protected] > http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface > >
_______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
