Hi Robert, hi All, Am 05.03.2017 um 23:03 schrieb Robert Helling: > Hi, > >> On 5 Mar 2017, at 21:15, Dirk Hohndel <[email protected] >> <mailto:[email protected]>> wrote: >> >>> Issue 1 is linked to commit "Call the cylinder working pressure >>> "starting pressure" in planner" and thereby already present in 4.6.3: >>> >>> When re-edit a dive the cylinder table looks like this (sorry for >>> the German): >>> >> Still trying to figure out what's going on here. > > this looks like i screwed this up. Will look into it tomorrow. >
By accident I just figured out that the issue I described is not linked to re-planning a dive but to having 4 cylinders or more in the cylinder table in the planner. Means you can also plan a new dive and increase to 4 cylinders to cause the issue (messed up cylinder table). If you then remove one cylinder again and reduce to number of cylinders to 3 or less the additional table row disappears again. Best regards Stefan -- Stefan Fuchs E-Mail: [email protected] <mailto:[email protected]>
_______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
