On 10 March, 2017 - Anton Lundin wrote: > On 09 March, 2017 - John Smith wrote: > > > I am playing with the planner and have a few questions, hopefully showing > > my lack of knowledge rather than bugs [😊] > > > > > > I have 4.6.3.36 running on W10. > > > > > > Firstly, although i have all the ascent rates set to 10m/min, the ascent > > rate in the profile window shows 9m/min. > > > > After some testing, i think this is due to that all the spinboxes > doesn't trigger update on the plan. Try to change the depth or duration > up and down and the plan will be re-calculated with the right values.
Nope. It wasn't. I was just a bad tester. Its just a artifact of which depths and time steps that the planner works with. Ex, if you change all the Ascent speeds to 15m/min, the profile for that dive will be 15m/min. The planner tries to match the configured Ascent speeds, but if they don't align with the depth/time, it errors to the side of caution, and accents a bit slower. //Anton -- Anton Lundin +46702-161604 _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
