On 25 May 2017 at 12:13, Steve <[email protected]> wrote: > > I wonder what it would take for 'activate' subsurface to display the dil and > o2 like it does for the MkVI, maybe it just needs some code to check the dive > mode / dctype and existing pressures then do the output as the MkVI code? > I originally thought it was because of a bug that the gas was set to the > wrong type as dil and o2 were not in the 'Use' list anymore.
Actually I didn't see the code. From what I read they implemented a full importer for MKVI and it carries all the data. > I thought your use case description looked very good and normal for most ccr > divers using most electronics. > The one exception is that almost all of the ccr divers I talk with express o2 > consumption as litres per minute as that way the oxygen tank size does not > matter like it does expressed as your bar per hour example. Yes you are right. The bar per hour was just a ballpark estimate at the end of the dive: you look at your spg and immediately knows if your average consumption is ok. Nevertheless the liter/minutes figure is the way to go. Bye -- Davide https://vimeo.com/bocio/videos _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
