On Wed, Jul 12, 2017 at 01:28:50PM +0200, Anton Lundin wrote: > On 12 July, 2017 - Salvador Cuñat wrote: > > > Good morning Anton. > > > > Attached is another log done with the. 4.6.4-380 beta. > > > > Interesting line is #144, where it says "firmware=0" (it should call > > 3.14). > > This and the fact that H&W fw versions under 1.90 used to download 32k > > logbooks instead of 64k logs, could easily explain why we are just > > downloading 32x1024 bytes blocks, and getting the oldest dives (about > > half of those stored) > > > > Then the question would be, why Android misses the firmware version > > while Desktop doesn't? > > > > Hope this blind shot can somehow help. > > I looked at src/hw_ostc.c hw_ostc_device_foreach, where serial and > firmware are parsed and put into the devinfo data structure, and I can't > figure out how serial can get set but not firmware. > > I took a tour in our android logging and ended up staring at > qt-models/messagehandlermodel.cpp. The wierd thing is that all our trace > prints of serial and firmware also contains the same numbers in hex, but > that trace print doesn't, so somethings fishy with the logging to.
You're looking at old code. The new code no longer shows the hex to the user (but still writes it to a libdivecomputer log). So if you are looking at the subsurface.log, then no hex. Looking at libdivecomputer.log you'll get the hex /D _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
