On 18-07-17 18:41, Chirana Gheorghita Eugeniu Theodor wrote:
Does anyoane here has the same issue or I am the only one?
On Jul 17, 2017 23:30, "Chirana Gheorghita Eugeniu Theodor"
<[email protected] <mailto:[email protected]>> wrote:
Ahoy list,
This is my first message here so I wish to say hello to all users
and a big thank you to developers.
I recently downloaded a dive from my dc , a tusa zen iq-900, using
the mobile app on Android. All ok. I completed all dive details
using a windows pc (weight, air temp, gps location, tank etc...) All
ok , dive was saved corectly to cloud.
Now because it was a altitude dive and from my dc Subsurface does
not read altitude, even if the dc adjusts automaticly, i entered in
the edit dive in dive planner , selected the proper altitude and
saved the dive.
Issue is that temperature data is lost (before the edit it was shown
in graph).
> Am I missing a setting in Subsurface?
I can confirm this issue. However, the big question is whether it needs
to be repaired. The planner is not intended to adapt all data from a
real executed dive. You even get a warning "Trying to replan a dive that
is not a planned dive" before you try. Also the profile gets "simplied"
(obviously, because you do not want to plan a dive with a 2 second
interval of the samples from the dive computer). So basically, you are
touching a use case that is never intended functionality.
This all said. The question remains: why can the air pressure not be
edited on an executed dive? Just like the Air/Water temperatures.
I also observed on another dive with deco, after adding the tank
exchange (using windows app) the red bar (dc reported ceiling)
dissapeared.
I cannot reproduce this (assuming you are talking about the normal view,
so not the planner. I use this (adding a deco gas) a lot, and have not
seen this ever.
--jan
_______________________________________________
subsurface mailing list
[email protected]
http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
