notifying the mailing list about this: https://github.com/Subsurface-divelog/subsurface/issues/391
Jeff has responded with: > The dive computer doesn't respond to the commands that are send. Usually this > indicates some external problem (e.g. low battery, bad or wet contacts, > device not in PC mode, a problem with the driver, etc). But those are also > the kind of problems that are very difficult to diagnose remotely. To be > honest, I have no clue why it doesn't work. > > We only know it works on Windows. So the dive computer (no low battery) and > PC interface (no bad contacts) are probably fine, and obviously @torkve knows > the correct procedure to initiate a transfer too (PC mode, although I don't > even know if that is required for the leonardo). So basically the only thing > that is left is the ftdi driver. But since ftdi is not some rare usb-serial > chipset, I would be surprised if the problem is located there. And then I'm > simply running out of ideas... lubomir -- _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
