Hallo Jef,
Two questions.
1) In both CCR mode as well as SCR mode, the Petrel 2 allows switching
between OC bailout gases and CC gases. This done by performing selecting
either BO->SC or SC->BO from the Shearwater menu. These events must
be recorded in the dive log but are presently not easily accessible, at
least from within Subsurface. How does libdivecomputer see the events?
Is there any way to acces them from Subsurface?
2) Shown below is the Subsurface log trying to download a Petrel 2 dive
into a dump for better analysis. However, every time I try this, the
download aborts. With the "Save dumpfile" and Save logfile: options NOT
checked, the download goes flawlessly. One thing to notice is the
warning below:
WARNING: Disabled all O2 sensors due to a default calibration value.
This is despite explicit calibration before the dive. This is similar to
your issue with my Predator download, previously discussed.
Unfortunately the Predator is in the UK at present, so I could not do an
analogous download from that dive computer.
Any comments will be highly appreciated.
Starting download from BT
Starting the thread 0
INFO: FTDI disabled
void QBluetoothSocketPrivate::_q_readNotify() 31 error: -1 "Resource
temporarily unavailable"
Connection on channel 1 failed. Trying on channel number 5.
INFO: dc_deveice_open error value of 0
[7.923528] WARNING: Disabled all O2 sensors due to a default calibration
value. [in ../../src/shearwater_predator_parser.c:503
(shearwater_predator_parser_cache)]
Finishing the thread dives downloaded 3
Starting download from BT
Starting the thread 0
The above is a successful download without the dumpfile and logfile
check boxes activated. Now, I check these checkboxes.
INFO: FTDI disabled
void QBluetoothSocketPrivate::_q_readNotify() 32 error: -1 "Resource
temporarily unavailable"
Connection on channel 1 failed. Trying on channel number 5.
void QBluetoothSocketPrivate::_q_readNotify() 32 error: -1 "Resource
temporarily unavailable"
Failed to connect to device 00:13:43:5B:8F:BE . Device state
QBluetoothSocket::UnconnectedState . Error:
QBluetoothSocket::UnknownSocketError
INFO: dc_deveice_open error value of -6
Finishing the thread Error opening the device %s %s (%s).
In most cases, in order to debug this issue, a libdivecomputer logfile
will be useful.
You can create this logfile by selecting the corresponding checkbox in
the download dialog. dives downloaded 0
Starting download from BT
Starting the thread 0
INFO: FTDI disabled
void QBluetoothSocketPrivate::_q_readNotify() 32 error: -1 "Resource
temporarily unavailable"
Connection on channel 1 failed. Trying on channel number 5.
INFO: dc_deveice_open error value of 0
Finishing the thread Dive data import error dives downloaded 0
Starting download from BT
Starting the thread 0
INFO: FTDI disabled
The connection on RFCOMM channel number 1 took more than expected. Wait
another 15 seconds.
void QBluetoothSocketPrivate::_q_readNotify() 32 error: -1 "Resource
temporarily unavailable"
Failed to connect to device 00:13:43:5B:8F:BE . Device state
QBluetoothSocket::UnconnectedState . Error:
QBluetoothSocket::UnknownSocketError
INFO: dc_deveice_open error value of -6
Finishing the thread Error opening the device %s %s (%s).
In most cases, in order to debug this issue, a libdivecomputer logfile
will be useful.
You can create this logfile by selecting the corresponding checkbox in
the download dialog. dives downloaded 0
Kind regards,
willem
--
This message and attachments are subject to a disclaimer.
Please refer to
http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf for full
details.
_______________________________________________
subsurface mailing list
[email protected]
http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
