On Fri, Mar 2, 2018 at 11:18 PM, James Cialdea <[email protected]> wrote:
> I came back from a trip where we used a few different nitrox mixes, but > all the same tank size. I imported all the dive profiles from my Suunto > vyper air. Then, I selected all the dives and set the cylinder size in one > mutli-dive-edit operation. > > I expected the cylinder size to be set on all dives and no other updates > to happen. Instead, all dives were assigned the gas mix from the first > dive, and all were assigned the same, expected, cylinder. The start and end > pressure, which is on the same line when editing cylinder or gas mix, were > unchanged, as expected. > > Is this behavior of updating the gas mix on all dives when only the > cylinder is changed intentional? > Did you modify the cylinder size or did you copy-paste the size? If you change the size, then it should be changed for all the selected dives with no changes in the other information. If you paste cylinder information, that will change other info than the size as well. miika
_______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
