On 2022/02/08 00:17, Michael Andreen wrote:
The problem seems to be what JB2Cool mentioned in the previous thread. You
have the planner deco pO2 set to 0.60 instead of 1.60. The available gases
shows both Bot. MOD and Deco switch at. The Bot. MOD uses the Bottom pO2 and
18m for 50% and 4m for 100% seems fine. The deco switch at uses the Deco pO2
and in your case it shows nonsense -3m for oxygen. I've recreated your plan
with Deco pO2 set to 0.60 and 1.60 and the 0.60 matches your values.
/Michael
Problem solved. As indicated previously, my finger trouble. Have no idea
how the preference was set to pO2=0.6
Thank you, Michael.
wf
--
This message and attachments are subject to a disclaimer.
Please refer to
http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf
<http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf> for
full
details.
_______________________________________________
subsurface mailing list
[email protected]
http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
