Hello, E2 detectors spanning multiple (consecutive) lanes are already supported by SUMO (see attribute 'lanes' at http://sumo.dlr.de/wiki/Simulation/Output/Lanearea_Detectors_(E2)). For neighboring lanes you need to define multiple detectors. Also, Netedit does not yet support defining detectors that span consecutive lanes.
If the entry lanes only target the exit lanes (and do not have connections to another edge) you can use an e3 detector to measure the timeloss. However, most of the time it is sufficient to measure the timeLoss on the entry lanes for determining the efficiency of a controller. regards, Jakob 2017-06-29 12:31 GMT+02:00 Pablo Álvarez López via sumo-user < sumo-u...@lists.sourceforge.net>: > Hi Menno, > > This bug was already fixed in the current SVN Version of SUMO. You can > download and compile the SVN Version of SUMO to avoid bugs as these. > > Regards > > —————————————————————————— > > *Deutsches Zentrum für Luft- und Raumfahrt* e.V. (DLR) > > Institut für Verkehrssystemtechnik | Bewertung des Verkehrs | > Lilienthalplatz 7 | 38108 Braunschweig > > > > *Pablo Álvarez López* > > Telefon +49 531 295-3159 <%2B49%20531%20295-3457> | * > pablo.alvarezlo...@dlr.de > <pablo.alvarezlo...@dlr.de>* > > www.DLR.de <http://www.dlr.de/> | Institut für Verkehrssystemtechnik > <http://www.dlr.de/ts> > > 2017-06-29 11:45 GMT+02:00 Menno van der Woude via sumo-devel < > sumo-devel@lists.sourceforge.net>: > > > Hello, > > > > here is a NETEDIT crash I came accross: > > > > - add an e3 detector to a network, add detEntry and detExit to it (both > in > > different edges) > > - now try adding another detExit, to the same e3 detector; NETEDIT shows > a > > message box: FXCommandGroup::abort: already working on undo or redo. > > - then NETEDIT crashes. > > > > Maybe this is expected behaviour? Ie., maybe this is not supposed to be > > possible? > > It would be nice (also for e2 detectors) to be able to have them span > > multiple lanes. Is that a planned feature? (Or would it complicate things > > like measuring occupancy etc?) > > > > In this example, I would like to measure delay time (ie. timeloss) over a > > controlled intersection, where there is one entry lane, and two exit > lanes. > > Would I need to add 2 e3 detectors? > > > > Kind regards, > > > > Menno van der Woude > > CodingConnected e.U. (Wien - Österreich) > > E me...@codingconnected.eu > > W www.codingconnected.eu > > > > ------------------------------------------------------------ > > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > sumo-devel mailing list > > sumo-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/sumo-devel > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > sumo-user mailing list > sumo-u...@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sumo-user > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sumo-devel mailing list sumo-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sumo-devel
