Hello,
in your flow definitions you wrote attribute 'Type' with a capital T but it
must be 'type'.
regards,
Jakob

2018-02-21 14:59 GMT+01:00 Manoel J. <manoelbarroson...@hotmail.com>:

> Hello all, thanks for receiving me here!
>
> Guys, I tried to search for the same issue here on this forum, on the SUMO
> user documentation guide and other places on the internet but I didn't find
> a solution for that.
> I'm trying to make work a simple simulation on a grid-net with three
> different flows.
> For the network building, I used the NETGENERATE command, inputing these
> parameters:
> *File Name: net_.net.xml*
> =====================
> <grid_network>
>         <grid value="true"/>
>         <grid.number value="5"/>
>         <grid.length value="50"/>
>         <grid.attach-length value="50"/>
> </grid_network>
> =====================
> And for the demand modeling, I used the following code:
> *File Name: flows.rou.xml*
> =====================
> <routes>
> <vType id="bus" accel="2.6" decel="4.5" sigma="0.5" length="12" minGap="3"
> maxSpeed="20" color="0,0,1" vClass="bus" guiShape="bus"/>
> <vType id="car" accel="2.6" decel="4.5" sigma="0.5" length="3.5"
> minGap="1.5" maxSpeed="22" color="1,1,0" vClass="passenger"
> guiShape="passenger"/>
> <vType id="moto" accel="2.6" decel="4.5" sigma="0.5" length="2"
> minGap="1.0" maxSpeed="20" color="1,0,1" vClass="motorcycle"
> guiShape="motorcycle"/>
>
> <route id="left_right" edges="left2to0/2 0/2to1/2 1/2to1/3 1/3to2/3
> 2/3to3/3 3/3to4/3 4/3to4/4 4/4toright4" />
> <route id="bottom_top" edges="bottom1to1/0 1/0to1/1 1/1to2/1 2/1to2/2
> 2/2to2/3 2/3to1/3 1/3to1/4 1/4totop1" />
> <route id="right_left" edges="right1to4/1 4/1to4/2 4/2to4/3 4/3to3/3
> 3/3to2/3 2/3to1/3 1/3to0/3 0/3toleft3" />
> <route id="top_bottom" edges="top0to0/4 0/4to1/4 1/4to1/3 1/3to1/2
> 1/2to2/2 2/2to2/1 2/1to2/0 2/0tobottom2" />
>
> <flow id="1" Type="car" period="10" begin="0" end="10000" color="0,0,1"
> route="esq_dir"/>
> <flow id="2" Type="bus" period="10" begin="0" end="10000" color="1,1,0"
> route="cima_baixo"/>
> <flow id="3" Type="moto" period="10" begin="0" end="10000" color="1,0,1"
> route="baixo_cima"/>
>
> </routes>
> =====================
>
> To create a configuration file, I used as it follows:
>
> *File Name: CONFIGFLOW.sumocfg*
>
> *=====================*
>
> <configuration>
>     <input>
>         <net-file value="net_.net.xml"/>
>         <route-files value="flows.rou.xml"/>
>     </input>
>     <time>
>         <begin value="0"/>
>         <end value="10000"/>
>     </time>
> </configuration>
> =====================
>
> The simulations runs perfetcly, except from the fact that the shapes used
> on the real world simulation are all standards. I tried changing the
> guiShape several times with different codes but it just doesnt work, it
> keeps showing a regular passenger car in every flow, instead of displaying
> motorcycles, buses and passenger cars. The version I'm using is the
> latest version (0.32.0).
> Can anyone help me with this guiShape thing?
>
> *Manoel Joaquim Rodrigues Barroso Neto*
>
> *Bacharelando em Engenharia Civil*
>
> *Universidade Federal de Juiz de Fora*
>
>
> *(+55) 21-97255-8366 <+55%2021%2097255-8366> (+55) 32-98418-7950
> <+55%2032%2098418-7950>*
>
> _______________________________________________
> sumo-user mailing list
> sumo-user@eclipse.org
> To change your delivery options, retrieve your password, or unsubscribe
> from this list, visit
> https://dev.eclipse.org/mailman/listinfo/sumo-user
>
>
_______________________________________________
sumo-user mailing list
sumo-user@eclipse.org
To change your delivery options, retrieve your password, or unsubscribe from 
this list, visit
https://dev.eclipse.org/mailman/listinfo/sumo-user

Reply via email to