How do I make sure that the simulation is using the Wiedemann Model?
In my simulation this is how I am defining the Wiedemann model:
<vType id="car1" vClass="passenger" accel="1.4" decel="1.8"
length="4.64" maxSpeed="33" color="1,1,1" carFollowModel="Wiedemann"
tau="1.0" security="1.0" estimation="1.0" emergencyDecel="5.5"
apparentDecel="5.0">
</vType>
But the vehicle that uses this vType does not move according to the
Wiedemann model.
In this picture "EXT" is the vehicle which has been assigned "car1" from
above and "Ford1" is the leader of "EXT" which is moving according to a
predefined speed via TraCI.
According to my manual calculations, the speed difference (dv) becomes
greater than the threshold (sdv) at time step 81, so it is expected that
the driver "EXT" should decelerating in the next time step. But as you can
see this does not happen and the driver begins to decelerate at time step
89 resulting in the collision.
_______________________________________________
sumo-user mailing list
[email protected]
To change your delivery options, retrieve your password, or unsubscribe from
this list, visit
https://dev.eclipse.org/mailman/listinfo/sumo-user
