Hello,
while using E1 detectors I noticed the following:
* in NETEDIT I set the 'vTypes' field to a specific value, for example 5
* I generate traffic with vehicle type 5 (using od2trips)
* now, when I use something like this:
<vType carFollowModel="Krauss" vClass="bus" id="5" length="15.5"
sigma="0.751" tau="0.825" />
all works well: the E1 detector is activated when a vehicle with
this type is on it
* however, when I use instead something like this:
<vTypeDistribution id="5">
<vType carFollowModel="Krauss" vClass="bus" id="vehDistBus0"
length="14.801" sigma="0.751" tau="0.825"/>
... etc ...
</vTypeDistribution>
the detector is not activated when a vehicle of type 5 is on it
Is this know behaviour?
My goal is to allow for selective detection, so I can detect busses
and/or emergency vehicles seperately from other motorized vehicles.
Actually having a single kind of verhicle for the type is ok for me, but
the described behaviour seems like it could be a bug?
Thanks, greets,
Menno van der Woude
_______________________________________________
sumo-user mailing list
[email protected]
To change your delivery options, retrieve your password, or unsubscribe from
this list, visit
https://dev.eclipse.org/mailman/listinfo/sumo-user
