I'm pretty sure the problem is with the road geometry and the simulation itself is not affected besides the bad optics. Since I cannot recall road-geometry changes between 1.0.0 and 1.0.1 i'm at loss as to why this would happen now. Can you provide a small input example that works with 1.0.0 and shows the problem with 1.0.1?
regards, Jakob 2018-09-25 13:24 GMT+02:00 Lara CODECA <[email protected]>: > Hello Jakob, > > After SUMO 1.0.1 my roundabouts are messy again. (see pics) > > Can you confirm that even if the vehicles are going "backwards" in the > gui, the problem is not in > the simulation itself? > > Regards, > Lara > > On Thu, 28 Jun 2018 09:50:39 +0200 > Jakob Erdmann <[email protected]> wrote: > > > Also, as of now, your roundabouts should look much nicer because I fixed > a > > bug with the smooth corner computation. > > > > 2018-06-27 23:25 GMT+02:00 Lara CODECA <[email protected]>: > > > > > Good to know. > > > Thank you, Jakob :) > > > > > > On Wed, 27 Jun 2018 23:23:39 +0200 > > > Jakob Erdmann <[email protected]> wrote: > > > > > > > Hello, > > > > this is more of a geometry glitch which shows up due to having bigger > > > > junctions and thus shorter edges. > > > > Sometimes when the edges become to short their direction is guessed > > > wrongly. > > > > The network topology (driving direction) remains correct so you do > not > > > need > > > > to worry about this, actually. > > > > I'll try to fix it anyway. > > > > > > > > cheers, > > > > Jakob > > > > > > > > 2018-06-27 15:02 GMT+02:00 Lara CODECA <[email protected]>: > > > > > > > > > Hello again! > > > > > > > > > > I have the same error in another roundabout, but this time the > wrong > > > edge > > > > > stays in the smaller > > > > > network too!! > > > > > > > > > > See attachment. > > > > > > > > > > Thanks! > > > > > Lara > > > > > > > > > > On Wed, 27 Jun 2018 13:33:39 +0200 > > > > > Lara CODECA <[email protected]> wrote: > > > > > > > > > > > Hello Jakob, > > > > > > > > > > > > maybe I found a bug?? > > > > > > If not, if you know what's happening, I would love to know it > too. > > > > > > > > > > > > - complete.wrong.png is a screenshot of a roundabout with an > edge in > > > the > > > > > wrong direction. > > > > > > - alone.right.png is the perfectly good roundabout that I > isolated > > > to > > > > > send you a small scenario > > > > > > with the error (obviously I failed.) > > > > > > > > > > > > So: > > > > > > - faulty.roundabout.osm the isolated perfectly good roundabout > > > > > > - most.complete.osm the entire scenario WITH the problem > > > > > > - whereisit.add.xml a shapefile to show you where is the evil > > > roundabout > > > > > > > > > > > > - most.netcfg to generate with the --osm and most.static.sumocfg > to > > > run > > > > > it. > > > > > > > > > > > > I noticed this problem only now, I have no idea if it was > always > > > there > > > > > or not, sorry.. > > > > > > > > > > > > All the Best, > > > > > > Lara > > > > > > > > > > > > > > > > > > On Tue, 26 Jun 2018 09:00:46 +0200 > > > > > > Jakob Erdmann <[email protected]> wrote: > > > > > > > > > > > > > --default.junctions.radius > > > > > > > is correct. It was a typo on my part. > > > > > > > Thanks, > > > > > > > Jakob > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2018-06-26 8:59 GMT+02:00 Lara CODECA <[email protected] > >: > > > > > > > > > > > > > > > Hello Jakob, > > > > > > > > > > > > > > > > I'm using the new netconvert on my old scenario :) > > > > > > > > If I use --default.junctions.size 5 I get: > > > > > > > > > > > > > > > > Error: On processing option '--default.junctions.size': > > > > > > > > No option with the name 'default.junctions.size' exists. > > > > > > > > > > > > > > > > Is it > > > > > > > > <default.junctions.radius value="4" > > > > > > > > type="FLOAT" help="The default turning radius of > > > > > intersections"/> > > > > > > > > or is something else that I messed? > > > > > > > > > > > > > > > > Thanks, > > > > > > > > Lara > > > > > > > > > > > > > > > > On Fri, 22 Jun 2018 12:29:02 +0200 > > > > > > > > Jakob Erdmann <[email protected]> wrote: > > > > > > > > > > > > > > > > > Dear users and developers, > > > > > > > > > to improve the realism of the simulation when used with > > > > > out-of-the-box > > > > > > > > > settings we are going to change the default values of > various > > > > > options and > > > > > > > > > parameters for our upcoming 1.0 release (see > > > > > > > > > https://github.com/eclipse/sumo/issues/4235). > > > > > > > > > > > > > > > > > > In the development version we started with changing the > > > default > > > > > size and > > > > > > > > > detail of intersections. Since this has wide-reaching > effects, > > > it > > > > > may > > > > > > > > lead > > > > > > > > > to unexpected changes when rebuilding simulation networks. > > > > > > > > > If you are using the latest development version and > require > > > legacy > > > > > > > > > behavior, you may just set the old parameter values: > > > > > > > > > --default.junctions.size 5 > > > > > > > > > --junctions.corner-detail 0 > > > > > > > > > If you notice undesirable netconvert behavior, please let > us > > > know. > > > > > > > > > > > > > > > > > > regards, > > > > > > > > > Jakob > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > Lara CODECA > > > > > > > > Postdoc > > > > > > > > Tel : 04.93.00.81.51 > > > > > > > > > > > > > > > > EURECOM > > > > > > > > Campus SophiaTech > > > > > > > > http://www.eurecom.fr/ > > > > > > > > _______________________________________________ > > > > > > > > sumo-user mailing list > > > > > > > > [email protected] > > > > > > > > To change your delivery options, retrieve your password, or > > > > > unsubscribe > > > > > > > > from this list, visit > > > > > > > > https://dev.eclipse.org/mailman/listinfo/sumo-user > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > Lara CODECA > > > > > Postdoc > > > > > Tel : 04.93.00.81.51 > > > > > > > > > > EURECOM > > > > > Campus SophiaTech > > > > > http://www.eurecom.fr/ > > > > > > > > > > > > > > > > > -- > > > Lara CODECA > > > Postdoc > > > Tel : 04.93.00.81.51 > > > > > > EURECOM > > > Campus SophiaTech > > > http://www.eurecom.fr/ > > > > > > > -- > Lara CODECA > Postdoc > Tel : 04.93.00.81.51 > > EURECOM > Campus SophiaTech > http://www.eurecom.fr/ >
_______________________________________________ sumo-user mailing list [email protected] To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user
