Sir, We are trying to use SUMO for simulating scenarios with sub-lanes. Following is a brief description of our simulation setup (Map attached) : We have 4 x 4 grid with 16 intersections and we have both 2 lane and 3 lane roads in our map. Vehicles are inserted only at the end points in edges and the routes are defined from one end point to some another end point. Sub laning is allowed for vehicles.
We have upgraded to version 1.0.1 and are facing some issues while simulation. Following is the description of one such scenario (from the attached image) : In a three lane road with sub-lanes, the encircled vehicle (type = passenger) wants to take a right turn but it arrived in a lane which does not permit a right turn. Hence the vehicle has to first change the lane (at that very point) which it is unable to do, because of the traffic on the right lane. As a consequence of this, the vehicle gets stuck at the junction. This obstructs the following vehicles leading to a traffic jam at that junction. We believe that we might have overlooked some parameters which might be causing this issue but are unable to figure it out. Please help us in resolving this issue. Attachments : Map and scenario (with error) Thanks in advance! Sincerely, Khilan and Manish.
_______________________________________________ sumo-user mailing list [email protected] To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user
