Dear Sumo Community, I am quite a beginner and I have actually three different questions The first is concerning the "harmonicMeanSpeed" output from Induction loops that I am not able to generate for unknown reasons
Def: <inductionLoop id="CV_1" lane="-5005.0.00_0" pos="300" freq="60.00" file="CV_detInfo.xml" friendlyPos="1" vTypes="CV"/> Output: <interval begin="0.00" end="60.00" id="CV_1" nVehContrib="26" flow="1560.00" occupancy="7.66" speed="28.40" length="5.00" nVehEntered="27"/> The second is more of a general issue with what "equally spaced" in vehicular flow means (eg. when using vehsPerHour). I tried to find some sort of cycles for the distribution by analyzing the resulted flows but I couldn't find any. So I had to use Calibrators to ensure a constant number of vehicles on the network as I wanted to simulate different LOS. And here Comes the Third question regarding how calibrators behave(per default frequency) knowing that I am applying a per lane calibrator on a 3 lanes motorway with different flows per lane. As I start my simulation, the first two calibrators start only removing additional vehicles while the third is doing nothing even if it actually had no vehicles passing through (shouldn't it insert?). Next, vehicles in the first two lanes stopped and the 3rd calibrator then start generating some vehicles and done! The begin/end periods are the same for all three and the results are always showing that the first two lanes are well calibrated while the thrid is only having a 24veh/hour flow which is tooooo low. I just wonder how the calibrators logic works. I apologize for these long questionS and thank you for your support! ^^ Sincerely, -- Sent from: http://sumo-user-mailing-list.90755.n8.nabble.com/ _______________________________________________ sumo-user mailing list [email protected] To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
