Hello Jakob, I tried the version was updated on August 16 and found the same errors. Then, as per your instructions, I ran "make clean" followed by "make VERBOSE=1" inside cmake-build folder. Again, the ended in errors. The output of "make VERBOSE=1" instruction is attached herewith. Note that I am using Ubuntu 18.04 as operating system. thanks and regards, Dillip Rout
On Mon, 17 Aug 2020 at 14:42, Jakob Erdmann <namdre.s...@gmail.com> wrote: > in the cmake-build folder: > Please run 'make clean' > and then post the output of > 'make VERBOSE=1' > > Am So., 16. Aug. 2020 um 18:35 Uhr schrieb Tripplanner Mumbai < > tripplanner...@gmail.com>: > >> The message "Makefile:140: recipe for target 'all' failed" is a summary >> message. >> >>> a) post the output of the make-run to the list >>> >>> sudo make -j$(grep -c ^processor /proc/cpuinfo) |& tee >>> makefile-output.txt >>> >> Ended in following error: >> Makefile:140: recipe for target 'all' failed >> make: *** [all] Error 2 >> >> >>> b) run step 5 twice (the second step compiles only the erroneous step >>> again, so the second message might show up) >>> >>> sudo make -j$(grep -c ^processor /proc/cpuinfo) >>> >>> sudo make >>> >> Ended in Error: >> Makefile:140: recipe for target 'all' failed >> make: *** [all] Error 2 >> >>> c) try a newer version >>> >> All the above errors are respect to August 15 version. >> >> d) Someone else in this user group has an idea >>> >>> >> >>> Hello Harald, >>> >>> No, I did not get any other errors. Should I try other version? >>> thanks and regards, >>> Dillip Rout >>> >>> On Fri, 7 Aug 2020 at 11:20, Harald Schaefer <fechs...@gmail.com> wrote: >>> >>>> Hello Dillip, >>>> >>>> there must be another error in the output of the makefile. >>>> >>>> If you run step 5 without the -j option (just sudo make), the other >>>> error should be at the end too. >>>> >>>> Greetings, Harald >>>> Am 07.08.20 um 07:06 schrieb Tripplanner Mumbai: >>>> >>>> Hello Jakob, >>>> Thank you for taking so much of effort to correct the null pointer. >>>> >>>> I downloaded the latest version of August 5 and followed the following >>>> steps for installing SUMO on my Ubuntu 18.04 machine. >>>> >>>> 1. >>>> >>>> sudo apt-get install cmake python g++ libxerces-c-dev libfox-1.6-dev >>>> libgdal-dev libproj-dev libgl2ps-dev swig >>>> 2. >>>> >>>> export SUMO_HOME="$PWD/sumo" >>>> 3. >>>> >>>> sudo mkdir sumo/build/cmake-build && cd sumo/build/cmake-build >>>> 4. >>>> >>>> sudo cmake ../.. >>>> 5. >>>> >>>> sudo make -j$(grep -c ^processor /proc/cpuinfo) >>>> 6. >>>> >>>> sudo make install >>>> >>>> However,Step-5 resulted in the following error while installation: >>>> [ 2%] Linking CXX static library libutils_xml.a [ 2%] Built target >>>> utils_xml Makefile:140: recipe for target 'all' failed make: *** [all] >>>> Error 2 >>>> Kindly look into the issue. >>>> with best regards, >>>> Dillip Rout >>>> >>>> >>>> On Mon, 3 Aug 2020 at 19:19, Jakob Erdmann <namdre.s...@gmail.com> >>>> wrote: >>>> >>>>> Please try again with the latest development version tomorrow ( >>>>> https://github.com/eclipse/sumo/issues/7336). >>>>> >>>>> Am Mi., 22. Juli 2020 um 14:08 Uhr schrieb Tripplanner Mumbai < >>>>> tripplanner...@gmail.com>: >>>>> >>>>>> Finally, I installed SUMO through the command line (sudo apt install >>>>>> SUMO) and tried to get the previous stage data through TraCI but again >>>>>> the >>>>>> same issues persist here, i.e., it goes for exception and the program >>>>>> stops. >>>>>> It is a prolonged question which is yet to be answered by anyone, >>>>>> will I get an answer for it? >>>>>> >>>>>> On Sat, 11 Jul 2020 at 11:53, Tripplanner Mumbai < >>>>>> tripplanner...@gmail.com> wrote: >>>>>> >>>>>>> Again, accessing previous stage data leads to error when I tried >>>>>>> with the latest development version which was updated on July 9. >>>>>>> >>>>>>> On Thu, 9 Jul 2020 at 17:20, Tripplanner Mumbai < >>>>>>> tripplanner...@gmail.com> wrote: >>>>>>> >>>>>>>> Hello, >>>>>>>> >>>>>>>> I had raised this question long time ago that the TraCI program is >>>>>>>> unable to find the previous stage information incase the current >>>>>>>> stage has >>>>>>>> been completed successfully. Particularly I was trying to extract the >>>>>>>> following information from the previous stage. >>>>>>>> >>>>>>>> * print("previous >>>>>>>> stage","type",prevStage.type,"dest",prevStage.destStop,"travel time", >>>>>>>> prevStage.travelTime, "distance",prevStage.length,"depart time", >>>>>>>> prevStage.depart)* >>>>>>>> >>>>>>>> Unfortunately, the output does not contain all the required >>>>>>>> information, as shown below. >>>>>>>> *previous stage type 3 dest busStop#12 travel time -1.0 >>>>>>>> distance 672.437702712895 depart time -0.001* >>>>>>>> >>>>>>>> @Jakob replied: that information was previously missing from the >>>>>>>> stage output (https://github.com/eclipse/sumo/issues/7274). You >>>>>>>> can download the updated version tomorrow and find out the desired >>>>>>>> result. >>>>>>>> >>>>>>>> Surprisingly, when I tried to execute the TraCI code (demo-i.py) >>>>>>>> after installing the latest version (updated on July 5), I got >>>>>>>> some exceptions now which were not there in the previous versions. In >>>>>>>> particular I am getting the following error: >>>>>>>> *Error in Previous Stage retrieval, so, skip this >>>>>>>> personID: 2229* >>>>>>>> * , *which is due to line number 97 in my TraCI program. >>>>>>>> >>>>>>>> Kindly check the issues in the development version and suggest to >>>>>>>> me. I am enclosing the network and corresponding codes for tracing the >>>>>>>> issue. >>>>>>>> >>>>>>>> regards, >>>>>>>> Dillip Rout >>>>>>>> >>>>>>>> _______________________________________________ >>>>>> sumo-user mailing list >>>>>> sumo-user@eclipse.org >>>>>> To unsubscribe from this list, visit >>>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>>> >>>>> _______________________________________________ >>>>> sumo-user mailing list >>>>> sumo-user@eclipse.org >>>>> To unsubscribe from this list, visit >>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>> >>>> >>>> _______________________________________________ >>>> sumo-user mailing listsumo-u...@eclipse.org >>>> To unsubscribe from this list, visit >>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>> >>>> _______________________________________________ >>>> sumo-user mailing list >>>> sumo-user@eclipse.org >>>> To unsubscribe from this list, visit >>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>> >>> >>> _______________________________________________ >>> sumo-user mailing listsumo-u...@eclipse.org >>> To unsubscribe from this list, visit >>> https://www.eclipse.org/mailman/listinfo/sumo-user >>> >>> _______________________________________________ >>> sumo-user mailing list >>> sumo-user@eclipse.org >>> To unsubscribe from this list, visit >>> https://www.eclipse.org/mailman/listinfo/sumo-user >>> >> _______________________________________________ >> sumo-user mailing list >> sumo-user@eclipse.org >> To unsubscribe from this list, visit >> https://www.eclipse.org/mailman/listinfo/sumo-user >> > _______________________________________________ > sumo-user mailing list > sumo-user@eclipse.org > To unsubscribe from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user >
/usr/bin/cmake -H/home/dhrien/sumo -B/home/dhrien/sumo/build/cmake-build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /home/dhrien/sumo/build/cmake-build/CMakeFiles /home/dhrien/sumo/build/cmake-build/CMakeFiles/progress.marks make -f CMakeFiles/Makefile2 all make[1]: Entering directory '/home/dhrien/sumo/build/cmake-build' make -f src/utils/xml/CMakeFiles/utils_xml.dir/build.make src/utils/xml/CMakeFiles/utils_xml.dir/depend make[2]: Entering directory '/home/dhrien/sumo/build/cmake-build' cd /home/dhrien/sumo/build/cmake-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/dhrien/sumo /home/dhrien/sumo/src/utils/xml /home/dhrien/sumo/build/cmake-build /home/dhrien/sumo/build/cmake-build/src/utils/xml /home/dhrien/sumo/build/cmake-build/src/utils/xml/CMakeFiles/utils_xml.dir/DependInfo.cmake --color= make[2]: Leaving directory '/home/dhrien/sumo/build/cmake-build' make -f src/utils/xml/CMakeFiles/utils_xml.dir/build.make src/utils/xml/CMakeFiles/utils_xml.dir/build make[2]: Entering directory '/home/dhrien/sumo/build/cmake-build' make[2]: Nothing to be done for 'src/utils/xml/CMakeFiles/utils_xml.dir/build'. make[2]: Leaving directory '/home/dhrien/sumo/build/cmake-build' [ 2%] Built target utils_xml make -f src/CMakeFiles/generate-version-h.dir/build.make src/CMakeFiles/generate-version-h.dir/depend make[2]: Entering directory '/home/dhrien/sumo/build/cmake-build' cd /home/dhrien/sumo/build/cmake-build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/dhrien/sumo /home/dhrien/sumo/src /home/dhrien/sumo/build/cmake-build /home/dhrien/sumo/build/cmake-build/src /home/dhrien/sumo/build/cmake-build/src/CMakeFiles/generate-version-h.dir/DependInfo.cmake --color= make[2]: Leaving directory '/home/dhrien/sumo/build/cmake-build' make -f src/CMakeFiles/generate-version-h.dir/build.make src/CMakeFiles/generate-version-h.dir/build make[2]: Entering directory '/home/dhrien/sumo/build/cmake-build' [ 2%] Generating version.h cd /home/dhrien/sumo/build/cmake-build/src && /usr/bin/python /home/dhrien/sumo/src/../tools/build/version.py /home/dhrien/sumo/build/cmake-build/src version control file '/home/dhrien/sumo/.git/index' not found trying to generate version file /home/dhrien/sumo/build/cmake-build/src/version.h from existing header src/CMakeFiles/generate-version-h.dir/build.make:60: recipe for target 'src/version.h' failed make[2]: Leaving directory '/home/dhrien/sumo/build/cmake-build' CMakeFiles/Makefile2:370: recipe for target 'src/CMakeFiles/generate-version-h.dir/all' failed make[1]: Leaving directory '/home/dhrien/sumo/build/cmake-build' Makefile:140: recipe for target 'all' failed
_______________________________________________ sumo-user mailing list sumo-user@eclipse.org To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user