Hi Everyone,
I have a Road of 3 lanes of (road length is: 6000 meters)
Considering 3 flows that run on every lane of the road.
*My question is : *
* 01 - With departPos="last" the vehicles tend to be loaded on the
6000-meter (POS)(MAYBE THATS BECAUSE THE ROAD IS 6000 METER LONG BUT WHEN
REFFERING TO THE OUTPUT THE VEHICULES ON THE FLOW DONT DRIVE TO THE END OF
ROAD) mark, and I need to load them at the beginning of the road which is
in this case 10000-meter mark (so they will drive until the 4000-meter
mark).*
* 02 - Is it possible to apply speeds that range from 80km/h to 120km/h to
the vehicles of the flow, in such a manner that every vehicle in trailing
position will have a smaller speed than the vehicle ahead of it to avoid
collisions. also, the speeds have to be constant : *
* For example : *a range of speeds: 80 to 120km/h
Veh1 (head) = 110km/h(constant throughout simulation) , veh2 (trailing)
=100km/h(constant throughout simulation), veh3 (trailing of veh2) = 95km/h
(constant throughout simulation). etc
*Any Idea how to setup that automatically of should I use vehicle
speed distribution and sort the speeds and apply them manually to the
vehicles. (which means have not to use flows in this case: which is really
cumbersome when the number of vehicles is high).*
*Here is the code I'm using : *
*01 - *
<routes id="route">
<vTypeDistribution id="typedist1">
<vType id="silly" tau="0.0001" minGap="2" speedDev="0" decel="0.0001"/>
<flow id="flow0" type="silly" departLane="0" arrivalLane="current"
color="1,0,0" begin="0.00" end="0" number="17" departSpeed="max"
departPos="last" from="mainedge" to="mainedge"/>
<flow id="flow1" type="silly" departLane="1" arrivalLane="current"
color="0,1,0" begin="0.00" end="0" number="17" departSpeed="max"
departPos="last" from="mainedge" to="mainedge"/>
<flow id="flow2" type="silly" departLane="2" arrivalLane="current"
color="0,0,1" begin="0.00" end="0" number="16" departSpeed="max"
departPos="last" from="mainedge" to="mainedge" />
</vTypeDistribution>
</routes>
*02 - *
<nodes>
<node id="right" x="10000.0" y="300.0"/>
<node id="left" x="4000.0" y="300.0"/>
</nodes>
*03 - *
<edges>
<edge id="mainedge" from="right" to="left" numLanes="3" type="3L105"/>
</edges>
_______________________________________________
sumo-user mailing list
[email protected]
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
