add the line <ignore-route-errors value="true"/> anywhere between the <configuration> </configuration> elements of your config_file.sumocfg.
Am Mo., 15. März 2021 um 09:45 Uhr schrieb reihaneh koohi < [email protected]>: > Dear Jakob, > > Tons of thanks for the clarification. I applied the changes: > > <rerouter id="rerout1" edges="15to19 20to19 119to19 120to20 115to15 > 19to17"> > <interval begin="300" end="1500"> > <closingReroute id="19to17" disallow="all"/> > </interval> > </rerouter> > > > The number of using the name of link 19to17 (which is close for a period) > at file "od_route_file.odtrips.rou.xml" is the same number as I run the > code without closing. So it seems still doesn't work. > I am not sure if it works now, because I do not know where should I use > "*--ignore-route-errors". > *I do not know how to start the sumo with "--ignore-route-errors " While > I use sumo-gui with opening "config_file.sumocfg". > > I add "--ignore-route-errors" at the beginning of "config_file.sumocfg" > (exactly after the line <configuration>), but still I got the error > message: "Error: Vehicle '9852' is not allowed to depart on any lane of > edge '19to17'. > Quitting (on error)". and the program stops. > > It is very kind of you to let me know what to do > Bests, > Reihaneh > > > > On Mon, Mar 15, 2021 at 11:03 AM Jakob Erdmann <[email protected]> > wrote: > >> 1) Rerouters can only be usd with sumo (not duarouter) >> 2) A closingReroute by itself is sufficient to cause rerouting so you do >> no need to combine this with a destProbReroute. However, your rerouter >> definition is incorrect. The 'edges' attribute indicates the location where >> vehicles should change their route. This must be an edge that permits a >> detour and thus should be an edge with multiple successor edges that lies >> ahead of the closed edge. >> >> regards, >> Jakob >> >> Am So., 14. März 2021 um 09:31 Uhr schrieb Rkouhi < >> [email protected]>: >> >>> I use Siouxfalls network for simulation, and in run-time, I want to >>> close the >>> edge from node 19 to node 17 (which is named 19to17). But the vehicles do >>> not reroute after closing the edge (street). So, obviously sth is wrong. >>> I >>> will explain everything step by step. Hope one can find my mistake. >>> >>> 1) I make have additional file like this: (with name routinfo_add.xml) >>> >>> <rerouter id="rerout1" edges="19to17" probability="1.0"> >>> <interval begin="300" end="1500"> >>> <closingReroute id="19to17"/> >>> </interval> >>> </rerouter> >>> >>> Question 1: where should I use this additional file (I mean in which file >>> should I mention to this additional file)? I have >>> "duarcfg_file.trips2routes.duarcfg" file which makes the routes from the >>> trips, So I think this is where I should use it. >>> "duarcfg_file.trips2routes.duarcfg" is as follows: >>> >>> <configuration> >>> <input> >>> <net-file value="my_net.net.xml"/> >>> <route-files value="od_file.odtrips.xml"/> >>> <additional-files value="routinfo_add.xml"/> --->>> this is the >>> additional file >>> </input> >>> <output> >>> <output-file value="od_route_file.odtrips.rou.xml"/> >>> </output> >>> <report> >>> <xml-validation value="never"/> >>> <no-step-log value="true"/> >>> </report> >>> </configuration> >>> >>> Or should I use the additional file in config_file.sumocfg file? Which >>> is as >>> follows: >>> >>> <configuration> >>> <input> >>> <net-file value="my_net.net.xml"/> >>> <route-files value="od_route_file.odtrips.rou.xml"/> >>> <additional-files value="routinfo_add.xml"/> >>> </input> >>> <time> >>> <begin value="0"/> >>> <end value="7200"/> >>> </time> >>> >>> </configuration> >>> >>> >>> >>> Question 2: As far as I know, I have to introduce the new route after >>> the >>> line " <closingReroute id="19to17"/>" in additional file, so the vehicles >>> can use it as an alternative way. Sth like: <destProbReroute >>> id="rerout2"/> >>> This route2 consists of 3 edges (19to15, 15to10, 10to17) >>> >>> Where should I introduce this route2?? Before making the network or after >>> it? >>> Before making the network I have three files: my_edge.edg.xml, >>> my_node.nod.xml, my_type.type.xml. >>> Right now, I use it in my_edge.edg.xml, but it does not work! >>> >>> >>> That would be great if one can help me >>> Best Regards, >>> Reihaneh >>> >>> >>> >>> >>> -- >>> Sent from: http://sumo-user-mailing-list.90755.n8.nabble.com/ >>> _______________________________________________ >>> sumo-user mailing list >>> [email protected] >>> To unsubscribe from this list, visit >>> https://www.eclipse.org/mailman/listinfo/sumo-user >>> >> _______________________________________________ >> sumo-user mailing list >> [email protected] >> To unsubscribe from this list, visit >> https://www.eclipse.org/mailman/listinfo/sumo-user >> > _______________________________________________ > sumo-user mailing list > [email protected] > To unsubscribe from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user >
_______________________________________________ sumo-user mailing list [email protected] To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
