If you can't get equally distributed inflow over all lanes using other
instructions, consider making separate inflows for every lane (set
departLane to the respective lane index).
Please take into account that road capacity depends very much on the
assumed headway. Have a look at your CFM parameters
<https://sumo.dlr.de/docs/Definition_of_Vehicles%2C_Vehicle_Types%2C_and_Routes.html#car-following_models>
to change the headway.
Mirko
Am 27.08.2021 um 16:02 schrieb François Vaudrin:
It works better, thank youJakob,
However, I arrive at a maximum of 6,000 vehicles per hour, even if I
have planned 14,000 vehicles in two hours and there is sufficient
space at the entrance (5 lanes). The network is straight and extends
for approximately 3 km. It starts at 5 lanes, then it changes to four
lanes (100 meters further) and finally to three lanes (another 100
meters further) until the end of the network.
Despite the two bottenecks, there is no slowdown or traffic jam
throughout the simulation, and the maximum number of vehicles that
could enter the network after two hours is less than 12,000 vehicles
(around 11,800 for the last vehicle entered).
I added in .rou.xml file these instructions : departSpeed = "max"
departLane = "random" number = "14000"
I also tried with departLane = "random, but the results are comparable
(maximum around 6 000 vph)
Best
*François*
------------------------------------------------------------------------
*De :* François Vaudrin <[email protected]>
*Envoyé :* vendredi 27 août 2021 08:04
*À :* Sumo project User discussions <[email protected]>
*Objet :* RE: [sumo-user] Repeated vehicles (Flows)
Thank you so much Jakok,
I will look at it.
Best
*François
*
------------------------------------------------------------------------
*De :* sumo-user <[email protected]> de la part de Jakob
Erdmann <[email protected]>
*Envoyé :* vendredi 27 août 2021 07:59
*À :* Sumo project User discussions <[email protected]>
*Objet :* Re: [sumo-user] Repeated vehicles (Flows)
--extrapolate-departpos can also be put in a configuration file as
<extrapolate-departpos value="true"/> but it does not apply when
setting departPos="last".
You can further increase the flow by setting departSpeed="max"
departLane="best".
Am Fr., 27. Aug. 2021 um 13:48 Uhr schrieb François Vaudrin
<[email protected] <mailto:[email protected]>>:
Hallo Jakok,
Thank you for the answer, this is very helpful.
By adding departPos = "last" in the file .rou.xml, there are more
vehicles entering at the same time and they are grouped (chunk).
The result is better at the end of the simulation, even if it is
still about 20% missing (4815 real vs 6000 hoped for).
<interval begin = "0" end = "3600"> <flow id = "Car1" departPos =
"last" number = "6000" type = "CarA" from = "660867709" to =
"39276632" /> </interval> ..... there are 4 lanes at the beginning
to enter
If I increase the number = "7000" for one hour (3600 sec), I get
similar results (around 4 810 vehicles can enter at the end of the
simulation). Is this the best we can do or there is something else
we can add to the .rou.xml file?
I also saw in the link you provided that we can use 'specifying a
specific departPos. Is it as indicating the start time of each
vehicle individually during simulation.
|Vielen Dank|
|François|
|PS: when talking about setting option --extrapolate-departpos,
does this only apply for simulations in a terminal with a command
line?|
*François*
CANADA
------------------------------------------------------------------------
*De :* sumo-user <[email protected]
<mailto:[email protected]>> de la part de Jakob
Erdmann <[email protected] <mailto:[email protected]>>
*Envoyé :* vendredi 27 août 2021 03:43
*À :* Sumo project User discussions <[email protected]
<mailto:[email protected]>>
*Objet :* Re: [sumo-user] Repeated vehicles (Flows)
Please see
https://sumo.dlr.de/docs/Simulation/VehicleInsertion.html#insertion_departure
<https://sumo.dlr.de/docs/Simulation/VehicleInsertion.html#insertion_departure>
Am Fr., 27. Aug. 2021 um 05:25 Uhr schrieb François Vaudrin
<[email protected] <mailto:[email protected]>>:
Hello everyone,
I want to generate the arrival of vehicles in a network with
the flow command, but the actual number of vehicles generated
at the end of the simulation does not match the number of
vehicles indicated in my .rou.xml file.
For example, I planned 2000 vehicles during the interval, but
the real number at the end of the simulation is around 440.
I tried several combinations like number, probability,
vehsPerHour, etc ... but I am far from the expected number of
vehicles.
Maybe i missed something.
Do you have any idea how to solve this problem?
Here are some samples of my file .rou.xml
<interval begin="0" end="1000">
<flow id="Car1" begin="0" end="1000" number="2000" type="CarA"
from="660867709" to="39276632"/>
</interval>
other test:
<routes>
<vType id="CarA" guiShape="passenger" length="5.0"
minGap="2.5" maxSpeed="28" color="green">
</vType>
<flows>
<interval begin="0" end="3600">
<flow id="Car1" vehsPerHour="6000" type="CarA"
from="660867709" to="39276632" />
<flow id="Car1a" number="1000" type="CarA" from="660867709"
to="39276632" />
<flow id="Car3" probaility="0.8" type="CarB" from="660867709"
to="39276632" />
</interval>
</flows>
</routes>
Thanks in advance for your help
*François
*
CANADA
1
*ATTENTION : L’émetteur de ce courriel est externe à
l’Université Laval.
Évitez de cliquer sur un hyperlien, d’ouvrir une pièce jointe
ou de transmettre des informations si vous ne connaissez pas
l’expéditeur du courriel. En cas de doute, contactez l’équipe
de soutien informatique de votre unité ou
[email protected] <mailto:[email protected]>.
------------------------------------------------------------------------
_______________________________________________
sumo-user mailing list
[email protected] <mailto:[email protected]>
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
<https://www.eclipse.org/mailman/listinfo/sumo-user>
_______________________________________________
sumo-user mailing list
[email protected] <mailto:[email protected]>
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
<https://www.eclipse.org/mailman/listinfo/sumo-user>
_______________________________________________
sumo-user mailing list
[email protected]
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
_______________________________________________
sumo-user mailing list
[email protected]
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
