The simulation gives you these warnings: Warning: Route file should be sorted by departure time, ignoring 'AlliedHealth3'! Warning: Route file should be sorted by departure time, ignoring 'StadiumEdge1'! ...
Either sort the flows by begin time or split your input over multiple files (each of them sorted) Am Sa., 2. Okt. 2021 um 22:11 Uhr schrieb vincentobiako < [email protected]>: > Sorry about that. The files used to run my scenario is attached. There is > some general traffic flow in my scenario, but I will not attach that to > simplify the simulation. > > > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows > > > > *From: *Jakob Erdmann <[email protected]> > *Sent: *Saturday, October 2, 2021 2:51 PM > *To: *[email protected] > *Subject: *Re: [sumo-user] Getting Persons to enter Bus > > > > please attach the other files to run your scenario (network, stops) > > > > Am Sa., 2. Okt. 2021 um 20:38 Uhr schrieb vincentobiako < > [email protected]>: > > Jakob & Harald > > > > I was able to get person agents to enter the buses successfully as I > wanted. However, when I added demand for a different bus route no persons > showed up at any of the designated bus stops for the new route that I was > trying to add demand to. I looked through my xml code and I could not find > any mistakes. I am not sure what could be causing this mishap aside from > the ‘lines’ keyword which may be getting confused about if I am using a bus > line id or a vehicle id. Please know that in the ‘lines’ keyword I am > referring to a vehicle id rather than a particular bus line id. For > reference, I have attached both my person and vehicle xml files. > > > > The problem in the person flow seems to be occurring after line 215 and I > am not really sure what the issue is that is preventing the person agents > from appearing in my simulation during the designated time range. > > > > Thanks > > Ifezue > > > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows > > > > *From: *Jakob Erdmann <[email protected]> > *Sent: *Saturday, October 2, 2021 6:45 AM > *To: *Sumo project User discussions <[email protected]> > *Subject: *Re: [sumo-user] Getting Persons to enter Bus > > > > 1. Instead of using a walk to the first busStop you can also define your > personFlow with > > <personFlow id="pers2_4_" begin="0" end="3963" number="504" color="1,1,0"> > <stop busStop="B2" duration="0/> > <ride busStop="B4" lines="1"/> > </personFlow> > > > > Note, that this ignores the personCapacity of the busStop whereas > approaching the busStop with a walk with respect capacity and may cause > jamming on the sidewalk. > > > > If you wish to create bus schedules with until and duration values > automatically, (i.e. based on a sequence of stops), see > > > https://sumo.dlr.de/docs/Simulation/Public_Transport.html#importing_public_transport > > > > 2. No. You need two personFlows for this. > > > > regards, > > Jakob > > > > Am Sa., 2. Okt. 2021 um 12:01 Uhr schrieb Harald Schaefer < > [email protected]>: > > Hi Ifezue, > > i have build a simple model with 7 generic stations, my flows look like > this > > <personFlow id="pers1_5_" begin="0" end="3963" number="2016" > color="1,0,1"> > <walk from="AB1" busStop="B1"/> > <ride busStop="B5" lines="1"/> > <walk to="AB5"/> > </personFlow> > <personFlow id="pers2_3_" begin="0" end="3963" number="144" > color="1,0,0"> > <walk from="AB2" busStop="B2"/> > <ride busStop="B3" lines="1"/> > <walk to="AB3"/> > </personFlow> > <personFlow id="pers2_4_" begin="0" end="3963" number="504" > color="1,1,0"> > <walk from="AB2" busStop="B2"/> > <ride busStop="B4" lines="1"/> > <walk to="AB4"/> > </personFlow> > > I have above two flows originating at station B2 and ending at station B3 > resp B4. My passengers have colors according to there destination. > > I have a script createFlow(root, start, to, number) and can use lines like > this > > createFlow(root, 1, 2, 432) > createFlow(root, 1, 3, 1584) > createFlow(root, 1, 4, 2592) > createFlow(root, 1, 5, 2016) > createFlow(root, 2, 3, 144) > createFlow(root, 2, 4 , 504) > createFlow(root, 2, 5, 612) > createFlow(root, 2, 6 , 396) > > to create personFlows according to a simple O/D-Matrix > > Best regards, Harald > > Am 01.10.21 um 23:55 schrieb vincentobiako: > > Hello everyone > > > > I have two questions or issues. > > > > *First question or issue:* > > I am currently trying to have a person flow appear at specific bus stops > within my network and I was wondering if there is a way to have persons > appear at a bus stop no matter the time of arrival and have them enter a > bus when it arrives at the designated stop that the persons are located? I > was wondering because using keywords such as ‘until’ and ‘duration’ seem > quite tedious to use in my application of SUMO that has a large road and > bus network. Do you use the ‘triggered’ attribute? Also for some reference > please see the attached xml file for the ‘personFlow’ I am referring to. > > > > Please know that I am trying to make the bus ridership in simulation > follow a specific ridership distribution. > > > > *Second question or issue:* > > I was wondering if you could have a person flow start at a one bus stop > and end at two different bus stop locations? If this is possible how do you > implement this in xml? > > > > Thank you in advance > > Ifezue > > > > > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows > > > > > > _______________________________________________ > > sumo-user mailing list > > [email protected] > > To unsubscribe from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user > > _______________________________________________ > sumo-user mailing list > [email protected] > To unsubscribe from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user > > > > _______________________________________________ > sumo-user mailing list > [email protected] > To unsubscribe from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user > > >
_______________________________________________ sumo-user mailing list [email protected] To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
