According to my definition using TraCI, the red cars (called 'c1', 'c2',
..., 'c12') are supposed to stop till the end of the simulation which is
1000 seconds.
traci.vehicle.setStop('c1' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c2' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c3' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c4' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c5' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c6' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c7' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c8' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c9' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c10' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c11' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
traci.vehicle.setStop('c12' , edgeID = "e2", pos = "115", laneIndex =
0, duration = 1000)
This is the first picture after inserting the red cars.
[image: image.png]
As you can see in the next pictures, the number of red cars decrease.
[image: image.png]
[image: image.png]
Is it a kind of teleporting?
On Mon, Aug 8, 2022 at 12:07 PM [email protected] <
[email protected]> wrote:
> So how do you measure the queue length? Did you check in sumo-gui whether
> really no vehicle leaves / finishes its route at the stop / ...? It is
> difficult to guess the actual problem from your current description.
>
>
>
> Mirko
>
>
>
>
>
>
>
> -----Original-Nachricht-----
>
> Betreff: [sumo-user] traci.vehicle.setStop()
>
> Datum: 2022-08-05T17:16:46+0200
>
> Von: "ali mirzaei" <[email protected]>
>
> An: "Sumo project User discussions" <[email protected]>
>
>
>
>
>
>
> Hi everyone,
> I use "*traci.vehicle.setStop()*" to stop the first part of the vehicles
> at the rightmost of the path. Then I insert the second part so that they
> stop next to the first one using the same function. The first part must
> stay there till the end of the simulation but the second part stops
> temporarily. To my surprise, the queue length of the first parts gets
> shorter while no vehicles of that type are seen to leave the scenario. Why
> does this happen?
> Best regards,
> Ali
>
> _______________________________________________
> sumo-user mailing list
> [email protected]
> To unsubscribe from this list, visit
> https://www.eclipse.org/mailman/listinfo/sumo-user
>
_______________________________________________
sumo-user mailing list
[email protected]
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
