The problem is fixed in the latest development version. You can obtain it tomorrow at https://sumo.dlr.de/docs/Downloads.php#nightly_snapshots or next week in the official release of 1.18.
Am Mo., 19. Juni 2023 um 08:33 Uhr schrieb Jakob Erdmann < [email protected]>: > Thank you for the inputs. The bug is now being tracked at > https://github.com/eclipse/sumo/issues/13449 > > Am Fr., 9. Juni 2023 um 14:36 Uhr schrieb manos kampitakis < > [email protected]>: > >> Jacob I have attached a mini example of how I save the state. Also, I >> noticed that there are saved vehicles that have depart time after the saved >> state duration. For example, in the provided script I run the >> simulation until 900 sec and I save the state and inside there are >> vehicles that depart after 900 sec. >> >> Best regards, >> Manos >> >> Στις Παρ 9 Ιουν 2023 στις 3:00 μ.μ., ο/η manos kampitakis < >> [email protected]> έγραψε: >> >>> Jacob I have attached a mini example of how I save the state. Also, I >>> noticed that there are saved vehicles that have depart time after the saved >>> state duration. For example, in the provided script I run the >>> simulation until 900 sec and I save the state and inside there are >>> vehicles that depart after 900 sec. >>> >>> Best regards, >>> Manos >>> >>> Στις Πέμ 8 Ιουν 2023 στις 8:17 μ.μ., ο/η Jakob Erdmann < >>> [email protected]> έγραψε: >>> >>>> In my own test, saving and loading state with routeDistributions is >>>> working and I have no idea how arrived vehicles and up in your state file. >>>> If you could provide an example (i.e. sumocfg, traci script, xml input >>>> files) for reproducing the unusal state file, this would greatly aid in >>>> fixing the problem. >>>> >>>> Am Do., 8. Juni 2023 um 17:33 Uhr schrieb manos kampitakis < >>>> [email protected]>: >>>> >>>>> Hi Jakob, >>>>> >>>>> sorry for replying here but I know what is happening. Until the point >>>>> I run my simulation I have 319 arrived vehicles. As far as I can >>>>> understand >>>>> those vehicles should not be stored in the state file (they also don't >>>>> have >>>>> a trip info device). >>>>> Moreover there are exactly 319 "broken" routeDistribution tags (the >>>>> ones that correspond to the arrived vehicles). Because I used SUE (max >>>>> alternatives = 5) in one distribution I may have 1 or more (until 5) >>>>> possible >>>>> routes. I give an example of a broken routeDistribution: >>>>> >>>>> <routeDistribution id="!7107" state="0" routes="!7107#0 !7107#1 >>>>> !7107#2" probabilities="1.33 1.33 1.34"/> >>>>> >>>>> The vehicle with id "7107" is an already arrived vehicle. The vehicle >>>>> in the route file is depicted as follows: >>>>> <vehicle depart="0.75" departLane="random" departSpeed="avg" >>>>> fromTaz="in_18" id="7107" toTaz="left8" type="warm_up_car"> >>>>> <routeDistribution> >>>>> <route cost="99.35" edges="D6D7 D7C7 C7B7 B7B8 B8A8 A8left8" >>>>> probability="1.33352733"/> (!7107#0) >>>>> <route cost="99.80" edges="D6D7 D7C7 C7C8 C8B8 B8A8 A8left8" >>>>> probability="1.32770984"/> (!7107#1) >>>>> <route cost="98.97" edges="D6D7 D7C7 C7B7 B7A7 A7A8 A8left8" >>>>> probability="1.33876284"/> (!7107#2) >>>>> </routeDistribution> >>>>> >>>>> The vehicle during the simulation used the route edges="D6D7 D7C7 >>>>> C7B7 B7A7 A7A8 A8left8" which corresponds to !7107#2 which is the missing >>>>> route id from the state xml file. The only ones written are: >>>>> >>>>> <route id="!7107#0" state="0" edges="D6D7 D7C7 C7B7 B7B8 B8A8 >>>>> A8left8"/> >>>>> <route id="!7107#1" state="0" edges="D6D7 D7C7 C7C8 C8B8 B8A8 >>>>> A8left8"/> >>>>> >>>>> Best regards, >>>>> Manos >>>>> >>>>> Στις Πέμ 8 Ιουν 2023 στις 4:53 μ.μ., ο/η Jakob Erdmann < >>>>> [email protected]> έγραψε: >>>>> >>>>>> Please open up a ticket at https://github.com/eclipse/sumo/issues/new >>>>>> and attach minimal input files for replicating your problem (please try >>>>>> to >>>>>> pare down your scenario to the bare minimum). >>>>>> >>>>>> Am Do., 8. Juni 2023 um 15:43 Uhr schrieb manos kampitakis < >>>>>> [email protected]>: >>>>>> >>>>>>> Hi all, >>>>>>> >>>>>>> I want to run my simulation up to a point (e.g. 2700s) and then save >>>>>>> this state (using traci.simulation.saveState()). It seems that the >>>>>>> function >>>>>>> does not work properly. For example, when I am trying to load the saved >>>>>>> state I get the following error message: >>>>>>> Error: Unknown route '!#_1532#0' in distribution '!#_1532'. (this >>>>>>> happens many times inside the saved state xml) >>>>>>> The paths are generated using SUE (max alternatives = 5), teleport >>>>>>> is deactivated and during the run, until the point I run my simulation >>>>>>> in >>>>>>> order to save it, I get no error whatsoever from traci. >>>>>>> >>>>>>> Best regards, >>>>>>> Manos >>>>>>> _______________________________________________ >>>>>>> sumo-user mailing list >>>>>>> [email protected] >>>>>>> To unsubscribe from this list, visit >>>>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>>>> >>>>>> _______________________________________________ >>>>>> sumo-user mailing list >>>>>> [email protected] >>>>>> To unsubscribe from this list, visit >>>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>>> >>>>> _______________________________________________ >>>>> sumo-user mailing list >>>>> [email protected] >>>>> To unsubscribe from this list, visit >>>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>>> >>>> _______________________________________________ >>>> sumo-user mailing list >>>> [email protected] >>>> To unsubscribe from this list, visit >>>> https://www.eclipse.org/mailman/listinfo/sumo-user >>>> >>> _______________________________________________ >> sumo-user mailing list >> [email protected] >> To unsubscribe from this list, visit >> https://www.eclipse.org/mailman/listinfo/sumo-user >> >
_______________________________________________ sumo-user mailing list [email protected] To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
