Please just follow the suggestion of Jan to use the script loacted at
SUMO_HOME/tools/detector/mapDetectors.py . It uses the general process I
have outlined before.
Best regards
Mirko
-----Original-Nachricht-----
Betreff: Re: [sumo-user] Routes from counting data
Datum: 2023-07-14T16:04:28+0200
Von: "fereshte jafari via sumo-user" <[email protected]>
An: "Sumo project User discussions" <[email protected]>
Dear Mirko,
Thanks for your response.
My network is a very large network with a high number of detectors. Is it
possible to obtain the lane and position of all detectors at once instead
of one by one?
Regards,
Fereshteh
On Thu, Jul 13, 2023 at 3:32 PM fereshte jafari <[email protected]
<mailto:[email protected]> > wrote:
Hello!
I have a question regarding the detector file.
As it is mentioned in
<https://sumo.dlr.de/docs/Demand/Routes_from_Observation_Points.html> ,
SUMO requires the position of the detector on the lane to be expressed in
meters. Specifically, the position should fall within the range of
-1*lane's length to the lane's length. What I have in my database of
detectors is the "latitude" and "longitude" of detectors. I wanted to
know whether SUMO can read the "latitude" and "longitude" of detectors
and locate the detectors on the network or not. If yes, could you please
guide me on how to insert this information in the detector file?
Thanks in advance.
--
Sincerely,
Fereshteh Jafari Shahdani
PhD candidate, Dep. of Civil Engineering
ISISE - University of Minho
--
Sincerely,
Fereshteh Jafari Shahdani
PhD candidate, Dep. of Civil Engineering
ISISE - University of Minho
_______________________________________________
sumo-user mailing list
[email protected]
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
