Hi Florian,
to send an email to the mailing list, add [email protected]
<mailto:[email protected]> to the recipients. If I compare passenger
car data only and remove trucks from the simulation, the numbers match more
or less. Take into account that the vehicles may take longer to reach the
measuring sites depending on their route length and thus appear in
subsequent time intervals.
Best regards
Mirko
-----Original-Nachricht-----
Betreff: Aw: AW: [sumo-user] measured counts vs simulated values
Datum: 2023-08-04T16:03:14+0200
Von: "Florian Schnepf" <[email protected]>
An: "[email protected]" <[email protected]>
Hello Mirko,
I corrected it, repeated my test and still got a difference about 300
vehicles in the first three hours. I attached the induction loop file.
Do you have an explanation of how the deviation occurs, or how i can reduce
it?
Sorry that I replayed to you directly again, but I dont know how to answer
to the mailing list.
Thanks in advance
Have a great weekend
Best regards
Florian
Gesendet: Donnerstag, 03. August 2023 um 14:32 Uhr
Von: "Mirko Barthauer" <[email protected]>
An: "Sumo project User discussions" <[email protected]>,
"[email protected]" <[email protected]>
Cc: "Florian Schnepf" <[email protected]>
Betreff: AW: [sumo-user] measured counts vs simulated values
Hi Florian,
after looking for some time into the files you sent to me directly, it
seems everything is right (well except maybe for your input data). You
have defined overlapping measuring intervals in your input count file
(interval starting at 1080 should probably read 10800)!
Best regards
Mirko
-----Original-Nachricht-----
Betreff: [sumo-user] measured counts vs simulated values
Datum: 2023-08-02T10:59:11+0200
Von: "Florian Schnepf via sumo-user" <[email protected]>
An: "[email protected]" <[email protected]>
Hello together,
I am comparing the traffic volume with the input data. I noticed that
simulated traffic volume is significantly higher (4 times) than the input
data.
What can be the reason for this? The edgeData are in one hour interval
I used this command:
Thanks in advance
Florian
_______________________________________________
sumo-user mailing list
[email protected]
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
