Hi, This morning, after reboot, the first time that i have started the simulation all goes well and the simulation ended correctly. But the subsequent times sumo dies with exit code -11... Today dies after 2 time i call "command new route"..
Best Regards, Simone. 2013/10/14 Simone Rondelli <[email protected]> > >This warning is triggered if a vehicle cannot continue from the > >current lane and is unable to stop without exceeding its specified > >decel value. It might be caused by setting unsafe speeds via TraCI > >(with speed mode = 0), by abruptly changing the vehicles route or by > >bugs somewhere in the vehicle dynamics. > >However, it should not by itself cause the simulation to crash. > > Hi, sorry for my silence! > > Ok i have removed all errors and warnings.. but the error persist... > I've found the exactly point where the error occurs: when, by Veins, i > command new route, but not always.. only sometimes.. > > Now for some strange reasons the error occur always. > > My situation is: i have a vehicle that have to go to charging station when > is state of charge drops below a certain threshold... during the simulation > the vehicle go to recharge 6 times, the first fives goes well.. but the > last kills sumo who exit with exit code -11... > > Best regards, > Simone. > > > 2013/10/3 Jakob Erdmann <[email protected]> > >> > Warning: Vehicle 't448' performs emergency stop on lane '23288960#2_0 at >> > position 1.35 (decel=-25.64), time=566.10. >> >> This warning is triggered if a vehicle cannot continue from the >> current lane and is unable to stop without exceeding its specified >> decel value. It might be caused by setting unsafe speeds via TraCI >> (with speed mode = 0), by abruptly changing the vehicles route or by >> bugs somewhere in the vehicle dynamics. >> However, it should not by itself cause the simulation to crash. >> >> regards, >> Jakob >> >> 2013/10/2 Simone Rondelli <[email protected]>: >> >> Ah, okay. So we can't blame SUMO stopping on this error... >> > No infact! >> > >> >>If I remember right, this warning is only triggered when the current >> >>edge of a vehicle is vaporizing. Maybe the TraCI server isn't prepared >> >>to handle this. >> > >> >>It seems strange, though, that edges (or vehicles) in your simulation >> >>are vaporizing. Any idea why this might be happening? >> > >> > No but i will investigate! The strage thing is that this problem >> appeared >> > to me recently, but I did not understand after what ... Also why it >> happens >> > after a while... >> > >> > Best Regards >> > Simone Rondelli >> > >> ------------------------------------------------------------------------------ >> > October Webinars: Code for Performance >> > Free Intel webinars can help you accelerate application performance. >> > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the >> most from >> > the latest Intel processors and coprocessors. See abstracts and >> register > >> > >> http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk >> > _______________________________________________ >> > sumo-user mailing list >> > [email protected] >> > https://lists.sourceforge.net/lists/listinfo/sumo-user >> > > > > -- > Simone Rondelli > -- Simone Rondelli ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
