Hi Michael,
I confirm that with the bus configured in xml, stops and the person
jumps on the bus. Here is the xml code:
*<!-- bus.add.xml-->*
<busStop id="busstop1" lane="116895988#2_0" startPos="180"
endPos="200" lines="1 2"/>
<busStop id="busstop2" lane="116895988#4_0" startPos="70"
endPos="90" lines="1 2"/>
<vType id="BUS_DEMAND" accel="2.6" decel="4.5" sigma="0"
length="12" minGap="3" maxSpeed="70" color="0,1,0" guiShape="bus"
personCapacity="50"/>
<vType id="BUS" accel="2.6" decel="4.5" sigma="0" length="12"
minGap="3" maxSpeed="70" color="1,1,0" guiShape="bus" personCapacity="50"/>
*<!-- This flow of bus stops and the persons jumps on the bus -->*
<flow id="BUSLINE1" type="BUS" depart="0" period="300" line="1">
<route edges="116895988#2...319033097#2"/>
<stop busStop="busstop1" duration="20"/>
<stop busStop="busstop2" duration="20"/>
</flow>
*<!-- Here are the persons, person-2 doesn't jump on the vehicle with
type BUS_DEMAND added by traci define with line=2-->*
<person id="person-1" depart="150">
<walk from="116895988#2" to="116895988#2" departPos="120"
arrivalPos="190"/>
<ride from="116895988#2" to="116895988#4" lines="1"/>
<!--<walk from="116895988#4" to="116895988#4" departPos="85"
arrivalPos="125"/>-->
</person>
<person id="person-2" depart="239">
<walk from="116895988#2" to="116895988#2" departPos="125"
arrivalPos="190"/>
<ride from="116895988#2" to="116895988#4" lines="2"/>
<!--<walk from="116895988#4" to="116895988#4" departPos="85"
arrivalPos="125"/>-->
</person>
<person id="person-3" depart="400">
<walk from="116895988#2" to="116895988#2" departPos="125"
arrivalPos="190"/>
<ride from="116895988#2" to="116895988#4" lines="1"/>
<!--<walk from="116895988#4" to="116895988#4" departPos="85"
arrivalPos="125"/>-->
</person>
I remain at your disposal for any clarification.
Giannis
On 7/4/2015 11:31 πμ, Michael Behrisch wrote:
> Hi Giannis,
>
> Am 06.04.2015 um 09:26 schrieb Giannis Bakas:
>> Just to inform you that buses loaded from the xml are working fine,
>> probably because
>> the vehicle knows the start and end position of the stop, as you mentioned.
> Just to get this one right. If you give exactly the same stops via XML
> instead of TraCI it works? Or do you have larger stops (meaning startPos
> and endPos differ considerably) then?
>
> Regards,
> Michael
>
>
>
------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________
sumo-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sumo-user
